Alabama Sliding Door Repair Statewide door & window repair Click to Call (205) 619-2895
Home Alabama Coaling Door Hinge Repair

Coaling, Alabama · Tuscaloosa County

Door Hinge Repair and Replacement in Coaling, AL

We fix the cause of hinge failure rather than tightening screws that will be loose again by spring. Doors that have been sagging for a long time have usually damaged their own mortises, and that has to be repaired first.

  • Repair first, replace last
  • Homes & businesses
  • Tuscaloosa County covered
  • Straight answers on the phone

Click to Call (205) 619-2895

Door Hinge Repair diagram
Door Hinge Repair — Coaling, Alabama

We service every part of Coaling, including the I-20/59 exit 79 corridor and the Black Warrior River, and the nearby Tuscaloosa County towns like Northport and Cottondale.

Between the established parts of Coaling and the newer subdivisions, we see two different kinds of failure: worn-out frames on one side of town and worn-out hardware on the other.

Tell us what the door is doing and we will tell you what it needs.No guesswork over the phone, no pressure.

Click to Call (205) 619-2895

What Coaling customers call us about

These are the door hinge repair faults we are called out to most often in Coaling. If you recognise one, the underlying cause is usually the second half of the line.

  • The door drags on the floor or on the latch sideThe top hinge has pulled loose and the door has tilted.
  • A hinge leaf has bowed away from flatAn undersized hinge for the door weight, common where a solid door replaced a hollow one.
  • The door will not latch anymoreThe whole door has moved position because of hinge wear.
  • The door swings open or shut on its ownThe hinges are out of plumb, so gravity is doing the work.
  • The top hinge shows a visible V-shaped gapThe classic sag signature. The top hinge is carrying load the other hinges have stopped sharing.
  • Paint cracking around hinge leavesMovement. The hinge is shifting every time the door swings.

One call gets you an answer.We will tell you what is wrong and what it takes to fix.

Click to Call (205) 619-2895

What we see on door hinge repair around Tuscaloosa County

Humidity stays high from late spring through September, which is exactly when wood doors that fit fine in winter start dragging on the jamb.

A gust catching an open door and slamming it against its stop puts an enormous shock load through the top hinge, and that single event is often what starts a sag that develops over the following months.

Water running down a door edge collects at the hinge leaves and sits in the mortise, which corrodes the hinge and softens the jamb wood the screws are anchored in.

None of it is a reason to replace a door. It is a reason to use the right parts and set the door up correctly in the first place.

Local factors we account for in Coaling: storm wind and heavy rainfall — typical of west Alabama.

Get a real diagnosis, not a sales pitch.We fix doors for a living.

Click to Call (205) 619-2895

Our door hinge repair services in Coaling

  • Squeak eliminationCleaning, servicing and correctly lubricating hinges so they stay quiet.
  • Screw hole repairRebuilding stripped holes so fasteners bite properly instead of spinning.
  • Continuous hinge installationFull-length geared hinges for heavy commercial doors that keep tearing out standard hinges.
  • Pin and knuckle serviceReplacing worn pins, adding tips, and dealing with hinges that have worn oval.
  • Ball bearing hinge upgradeBearing hinges for heavy doors and doors fitted with closers.
  • Security hinge installationNon-removable pin hinges and hinge-side reinforcement on exterior doors.
  • Mortise repairRepairing damaged or over-deep hinge mortises in door and jamb.

Broken, stuck, or will not lock?Talk to someone who works on these every day.

Click to Call (205) 619-2895

Our door hinge repair process

  1. Measure the reveal all roundThe gap pattern around a sagging door points straight at which hinge has given up.
  2. Check what the screws are anchored intoMost repeat hinge failures are fastener failures, and that means finding the framing behind the jamb.
  3. Repair the mortise before fitting hardwareA new hinge in a damaged mortise will loosen again quickly. Jobs out this way get their fixings checked into framing rather than casing, which is what stops the sag coming back.
  4. Match the hinge to the doorWeight, size, throw and finish. Heavy doors and doors with closers need bearing hinges.
  5. Re-hang and check the revealAn even gap top to bottom, latch side and hinge side, before we go anywhere near the lock.
  6. Silence it properlyOnce the geometry is right, the pins and knuckles are lubricated so the squeak does not simply come back.

Most doors we see are repairable.Call and find out before you price a replacement.

Click to Call (205) 619-2895

What affects the cost of door hinge repair in Coaling

Pricing on door hinge repair depends on what has actually failed, which is why we talk it through before quoting. These are the things that move the number:

  • whether the mortises or screw holes need rebuilding first
  • how many hinges need replacement versus repair
  • the weight and size of the door
  • whether the door also needs re-hanging or the strike relocated
  • standard hinges versus ball bearing or continuous hinges

Call and describe what the door is doing. In most cases we can tell you over the phone which of those applies to you before anyone drives out to Coaling.

Most doors we see are repairable.Call and find out before you price a replacement.

Click to Call (205) 619-2895

Areas we cover for door hinge repair in Coaling

Coverage in Coaling takes in the I-20/59 exit 79 corridor, plus everything around Hurricane Creek and the Mercedes plant corridor.

Service area: Coaling, Tuscaloosa County, Alabama — and the surrounding communities.

We also cover the nearby Tuscaloosa County and west Alabama communities listed further down this page.

Need it looked at soon?Call and we will tell you honestly when we can get there.

Click to Call (205) 619-2895

Door hinge repair in Coaling: questions we get asked

Should I upgrade to security hinges on my exterior doors?

If the hinges are on the outside, yes. Non-removable pins or set screws stop the hinge side being an easy way in, and it is inexpensive compared with everything else you might do to secure an entry.

Can hinges be repaired or do they have to be replaced?

Pins, tips and lubrication problems are repairable. Once the knuckles have worn oval and the hinge has play in it, it is done and needs replacing, and putting a new pin in a worn hinge does not help.

Do you do commercial hinge work?

Yes, including continuous geared hinges for heavy traffic doors in Coaling businesses that keep tearing standard hinges out of the frame.

Why do my hinge screws keep coming loose?

Because they are only holding into jamb material, which is often less than an inch of soft wood. Long screws driven into the structural framing behind the jamb solve it permanently.

How do I know which hinge is the problem?

Look at the gap between the door and the frame down the latch side. If it is tight at the top and wide at the bottom, the top hinge has pulled. That is the one carrying the most load and it fails first.

My door swings open by itself. Can that be fixed?

Yes. That means the hinge line is out of plumb, so the door is rolling downhill. Re-hanging it plumb fixes it, and in Coaling it often turns up in houses where the frame has moved.

Broken, stuck, or will not lock?Talk to someone who works on these every day.

Click to Call (205) 619-2895

Other door repair services in Coaling


Door Hinge Repair near Coaling

We cover the surrounding Tuscaloosa County and west Alabama communities as well:

All door repair services in Coaling  ·  Door Hinge Repair across Alabama  ·  All Alabama service areas

One call gets you an answer.We will tell you what is wrong and what it takes to fix.

Click to Call (205) 619-2895
Click to Call (205) 619-2895Tap to speak to a door repair tech now