Alabama Sliding Door Repair Statewide door & window repair Click to Call (205) 619-2895
Home Alabama Concord Screen Door Repair

Concord, Alabama · Jefferson County

Screen Door Repair in Concord, AL

Screen doors get treated as disposable, which is a shame because most of what fails on them costs very little to fix. Mesh, spline, rollers and corner keys are all replaceable, and the frame is usually fine.

  • Repair first, replace last
  • Homes & businesses
  • Jefferson County covered
  • Straight answers on the phone

Click to Call (205) 619-2895

Screen Door Repair diagram
Screen Door Repair — Concord, Alabama

Between Concord proper, the the Warrior River Road corridor area and the newer building out toward Red Mountain, we stay busy in Jefferson County, and Bessemer is close enough that we are often nearby.

Concord has enough older housing stock that repair almost always beats replacement here, and enough new construction that we spend a lot of time on hardware that failed early.

Tell us what the door is doing and we will tell you what it needs.No guesswork over the phone, no pressure.

Click to Call (205) 619-2895

Common screen door repair faults in Jefferson County

These are the screen door repair faults we are called out to most often in Concord. If you recognise one, the underlying cause is usually the second half of the line.

  • The mesh has a shiny worn stripe near the handleAbrasion from contact with the track or jamb, meaning the frame is no longer running true.
  • The screen track itself is damagedThe channel the screen rides in has been bent or worn.
  • The screen door falls out of the trackWorn screen rollers or a bent top rail that no longer holds the panel in the head channel.
  • The storm door will not stay closedFailed closer or latch on a hinged storm door.
  • Corners have come apartFailed corner keys, which are replaceable.
  • The mesh is torn or has holesStraightforward rescreen, and worth doing before the tear spreads.

Need it looked at soon?Call and we will tell you honestly when we can get there.

Click to Call (205) 619-2895

Why screen door repair fails in the Birmingham metro

Birmingham-area red clay expands when it is wet and contracts hard when it dries out. That movement travels straight up into slabs and foundations, and door frames are usually the first place a homeowner notices it.

Humidity corrodes the steel components in screen rollers and rusts the tiny springs in adjusters, so screens seize up and drop out of their track.

Grit accumulating in the screen track is the reason most screens get hard to move, and it wears the small plastic rollers far faster than the weight of the panel ever would.

It is why the same repair done properly in Concord lasts, and the same repair done cheaply does not.

Local factors we account for in Concord: sustained humidity and grit and dust — typical of the Birmingham metro.

Need it looked at soon?Call and we will tell you honestly when we can get there.

Click to Call (205) 619-2895

What we repair

  • Sliding screen replacementCustom-built replacement screen panels where the original is beyond repair.
  • Storm door repairClosers, latches, hinges, sweeps and glass or screen inserts on storm doors.
  • Solar screen installationSolar mesh to cut heat gain through screened openings.
  • Screen roller replacementNew rollers and adjusters so a sliding screen tracks properly and stays in.
  • Pet mesh and pet grille installationHeavy-duty mesh and lower grilles for doors that dogs push against.
  • RescreeningNew mesh and spline in standard fiberglass, pet-resistant, solar or fine no-see-um mesh.
  • Frame repair and squaringStraightening bent frames and replacing corner keys.

Broken, stuck, or will not lock?Talk to someone who works on these every day.

Click to Call (205) 619-2895

What happens when we get there

  1. Check whether it is the screen or the trackA screen that keeps coming out is usually a roller and track problem, and rescreening it would not solve anything.
  2. Assess the frame for squareA racked frame will not sit in the track properly no matter what mesh is in it.
  3. Choose the right meshStandard fiberglass, pet-resistant, solar or fine mesh, depending on pets, sun exposure and what insects you are dealing with. We flush the running surfaces properly on metro jobs rather than just wiping them, since fine clay packs into places a cloth will not reach.
  4. Rescreen with correct tensionEven tension and properly seated spline so the mesh does not sag or pull out of the channel.
  5. Fit and adjust the rollersBoth rollers set so the frame runs level and the latch meets its keeper without lifting.
  6. Test the full travelEnd to end, several times, with the latch engaging cleanly at the close.

Not sure whether it is a repair or a replacement?Describe the symptoms and we will give you a straight answer.

Click to Call (205) 619-2895

What affects the cost of screen door repair in Concord

Pricing on screen door repair depends on what has actually failed, which is why we talk it through before quoting. These are the things that move the number:

  • roller and track work in addition to the screen itself
  • custom-built replacement panels where the original is not repairable
  • storm door hardware such as closers and latches
  • the mesh type chosen, from standard fiberglass to pet-resistant and solar
  • the size of the panel

Call and describe what the door is doing. In most cases we can tell you over the phone which of those applies to you before anyone drives out to Concord.

One call gets you an answer.We will tell you what is wrong and what it takes to fix.

Click to Call (205) 619-2895

Areas we cover for screen door repair in Concord

Coverage in Concord takes in the Warrior River Road corridor, plus everything around the Warrior River and Hueytown nearby.

Service area: Concord, Jefferson County, Alabama — and the surrounding communities.

We also cover the nearby Jefferson County and the Birmingham metro communities listed further down this page.

One call gets you an answer.We will tell you what is wrong and what it takes to fix.

Click to Call (205) 619-2895

Screen door repair in Concord: questions we get asked

My screen mesh has gone brittle and crumbles. What happened?

UV exposure. Screens on the south and west sides of a house in Concord take a lot of sun, and standard fiberglass mesh eventually degrades. Solar mesh lasts longer and cuts heat at the same time.

How long does a rescreen take?

Usually under an hour per panel in Concord. If the frame needs straightening or corner keys replaced, allow a bit longer.

What mesh should I use if I have dogs?

Pet-resistant mesh, which is a heavier vinyl-coated polyester, and often a pet grille across the lower section. Standard fiberglass will not survive a dog that pushes against it.

Can a bent screen frame be straightened?

Sometimes. Light aluminum frames can often be brought back to square, but a badly racked frame is usually better replaced, and a custom panel is not expensive.

Will a solar screen make my room cooler?

It helps noticeably on a sunny exposure. Solar mesh blocks a good portion of the heat before it reaches the glass, which matters on west-facing doors during Concord summers.

My sliding screen keeps falling out. Why does it keep happening?

The rollers have worn down so the panel is riding too low and the top rail no longer sits in the head channel. Lifting it back in without replacing the rollers means it will come out again, usually within days.

One call gets you an answer.We will tell you what is wrong and what it takes to fix.

Click to Call (205) 619-2895

Other door repair services in Concord


Screen Door Repair near Concord

We cover the surrounding Jefferson County and the Birmingham metro communities as well:

All door repair services in Concord  ·  Screen Door Repair across Alabama  ·  All Alabama service areas

Most doors we see are repairable.Call and find out before you price a replacement.

Click to Call (205) 619-2895
Click to Call (205) 619-2895Tap to speak to a door repair tech now