Alabama Sliding Door Repair Statewide door & window repair Click to Call (205) 619-2895
Home Alabama Deatsville French Door Repair

Deatsville, Alabama · Elmore County

French Door Repair in Deatsville, AL

We repair both interior and exterior French doors, including multipoint locking systems, sagging hinges, failed astragals and glass replacement in individual lites.

  • Repair first, replace last
  • Homes & businesses
  • Elmore County covered
  • Straight answers on the phone

Click to Call (205) 619-2895

French Door Repair diagram
French Door Repair — Deatsville, Alabama

Our territory takes in Deatsville and the communities around it in Elmore County, so calls from the AL-143 corridor, Old Ridge Road and out by Lake Jordan all get the same response.

Between the established parts of Deatsville and the newer subdivisions, we see two different kinds of failure: worn-out frames on one side of town and worn-out hardware on the other.

Broken, stuck, or will not lock?Talk to someone who works on these every day.

Click to Call (205) 619-2895

What Deatsville customers call us about

These are the french door repair faults we are called out to most often in Deatsville. If you recognise one, the underlying cause is usually the second half of the line.

  • One door swings open on its ownHinge line out of plumb on that leaf.
  • You can see the meeting stiles are no longer parallelOne leaf has racked, which no amount of adjustment at the lock will correct.
  • The astragal weatherstrip is compressed flat in one areaPoint loading where the leaves bind, and the seal has stopped working there.
  • The inactive leaf will not stay putFailed flush bolts at the head and sill.
  • Cold air pouring in down the middleFailed astragal weatherstrip on the joint between the leaves.
  • The handle set turns but nothing engagesBroken multipoint gearbox or a failed drive.

Most doors we see are repairable.Call and find out before you price a replacement.

Click to Call (205) 619-2895

What we see on french door repair around Elmore County

Remnants of Gulf systems still carry serious rain this far inland, and doors on the south and west sides of a house take the brunt of it.

Humidity swells both leaves toward each other, and since the meeting stile is where the two doors already have the tightest clearance, that is where a French door pair binds first every summer.

The bottom of the meeting stile is the hardest place on a house to keep watertight, and heavy rain against a French door pair will find any weakness in the sill seal or the threshold there.

Knowing that is the difference between a repair that holds through a Deatsville summer and one that does not.

Local factors we account for in Deatsville: sustained humidity and heavy rainfall — typical of the River Region.

Most doors we see are repairable.Call and find out before you price a replacement.

Click to Call (205) 619-2895

French door repair work we handle in Deatsville

  • Hinge repair and re-hangingCorrecting sag with proper fasteners into framing and re-hanging leaves plumb.
  • Threshold and sill workNew adjustable thresholds and sill seals under a pair of doors.
  • Astragal and weatherstrip replacementNew seals on the meeting stile so the middle joint actually closes.
  • Individual lite glass replacementReplacing failed or broken glass in single lites without replacing the whole door.
  • Frame squaringCorrecting frames that have moved and taken the doors out with them.
  • Sliding French door serviceRollers, tracks and hardware on sliding French systems.
  • Interior French door serviceAlignment, hardware and hinge work on interior pairs.

Not sure whether it is a repair or a replacement?Describe the symptoms and we will give you a straight answer.

Click to Call (205) 619-2895

What happens when we get there

  1. Look at the pair as one assemblyFrench doors fail as a pair. Adjusting one leaf without reference to the other just moves the problem across.
  2. Check both leaves independentlyOne door usually causes the problem, and treating both the same way makes it worse.
  3. Correct the hinges before the hardwareMultipoint locks and flush bolts cannot be adjusted into working if the door is sitting in the wrong place. Openings here get assessed for drainage as well as alignment, since summer storms find any weakness at the sill.
  4. Rebuild the seal at the meeting stileAstragal and weatherstrip get replaced together, because that centre joint is where the draft and the water come through.
  5. Set the locking hardwareKeepers adjusted so the shootbolts engage top and bottom with the handle lifting smoothly and no forcing.
  6. Cycle both leaves fullyOpen, close and lock each leaf several times, including the flush bolts, before we call it finished.

Broken, stuck, or will not lock?Talk to someone who works on these every day.

Click to Call (205) 619-2895

What affects the cost of french door repair in Deatsville

Every french door repair call in Elmore County is a little different, and the cost follows what the door actually needs:

  • glass replacement in individual lites
  • multipoint lock repair versus full gearbox replacement
  • astragal, weatherstrip and threshold replacement
  • whether one leaf or both need re-hanging
  • interior versus exterior pairs, since exterior work includes weatherproofing

Call and describe what the door is doing. In most cases we can tell you over the phone which of those applies to you before anyone drives out to Deatsville.

Get a real diagnosis, not a sales pitch.We fix doors for a living.

Click to Call (205) 619-2895

Areas we cover for french door repair in Deatsville

We work throughout Deatsville, including the AL-143 corridor and Old Ridge Road. If you are near Lake Jordan and the Coosa River, that is inside our normal service area.

Service area: Deatsville, Elmore County, Alabama — and the surrounding communities.

We also cover the nearby Elmore County and the River Region communities listed further down this page.

Get a real diagnosis, not a sales pitch.We fix doors for a living.

Click to Call (205) 619-2895

French door repair in Deatsville: questions we get asked

My French doors rub in the middle. Is that because the wood swelled?

Usually not. Nine times out of ten it is hinge sag on one leaf, and the giveaway is that the rub is worse at one end of the joint than the other. Real swelling affects the whole edge evenly and comes and goes with the season.

How long does French door repair take?

Most alignment and weatherstrip jobs in Deatsville take two to four hours. Multipoint gearbox replacement or glass work can add time, especially if parts need ordering for a specific manufacturer.

Do you work on interior French doors too?

Yes. Interior pairs have simpler hardware but exactly the same alignment problems, and they are usually a quick fix.

Are French doors less secure than a single door?

They can be, because there are two leaves and a joint in the middle. Reinforced strikes, solid flush bolts and long fasteners into the framing make a big difference and are inexpensive.

The inactive door keeps moving when I close the active one. Why?

The flush bolts at the top and bottom of the inactive leaf have failed or are no longer reaching their keepers. Both need to be solidly engaged or the whole pair loses its reference point.

Can sagging French doors be fixed without replacing them?

Yes, and it is the usual outcome. The fix is proper hinge repair with fasteners reaching the structural framing, plus re-hanging the leaf plumb. Replacing a pair of French doors is a large job by comparison.

One call gets you an answer.We will tell you what is wrong and what it takes to fix.

Click to Call (205) 619-2895

Other door repair services in Deatsville


French Door Repair near Deatsville

We cover the surrounding Elmore County and the River Region communities as well:

All door repair services in Deatsville  ·  French Door Repair across Alabama  ·  All Alabama service areas

Broken, stuck, or will not lock?Talk to someone who works on these every day.

Click to Call (205) 619-2895
Click to Call (205) 619-2895Tap to speak to a door repair tech now