Our Flomaton customers are spread from Main Street to the US-29 corridor and out around the Flomaton depot, and we serve the surrounding Escambia County communities on the same schedule.
The mix of housing here matters for door work. Older Flomaton homes have wood frames and hardware worth repairing rather than replacing, while newer construction tends to have vinyl and aluminum systems where the moving parts wear out long before anything else does.
One call gets you an answer.We will tell you what is wrong and what it takes to fix.
Click to Call (205) 619-2895What Flomaton customers call us about
These are the door closer repair faults we are called out to most often in Flomaton. If you recognise one, the underlying cause is usually the second half of the line.
- The door does not close the last inchClosing force is too low, or the door is binding on the frame in the final approach.
- The closer works well cold and slams when hotFluid thinning with temperature in a unit whose valves can no longer compensate.
- The door closes fast then stops shortMismatched sweep and latch speed settings.
- The door slams open against the wallBackcheck has failed or is not adjusted, and the arm and frame are taking the impact.
- The door slamsLatch speed valve out of adjustment, or a closer that has failed internally.
- Oil running down the door or the wallFailed seal inside the closer body. The unit needs replacing.
Need it looked at soon?Call and we will tell you honestly when we can get there.
Click to Call (205) 619-2895What we see on door closer repair around Escambia County
Salt air is the single biggest factor on the coast. It attacks the steel inside roller bearings, hinge pins, latch mechanisms and closer springs, and it does it year round whether or not a storm ever comes.
Salt air corrodes closer arm pivots and the exposed spindle where it enters the closer body, and once that seal is compromised the closer starts weeping oil and its life is effectively over.
Humidity swells a wood door so it drags in the frame during the final approach, and turning the closer up to overcome that makes the door punishingly heavy to open while doing nothing about the actual cause.
Knowing that is the difference between a repair that holds through a Flomaton summer and one that does not.
Local factors we account for in Flomaton: salt air and sustained humidity — typical of the Alabama Gulf Coast.
Most doors we see are repairable.Call and find out before you price a replacement.
Click to Call (205) 619-2895Door closer repair work we handle in Flomaton
- Floor closer repairServicing and replacing floor-mounted closers under heavy entrance doors.
- Wind and stop protectionFitting overhead stops so wind cannot destroy the closer arm.
- Mounting repairRepairing or reinforcing door and frame where closer fasteners have pulled out.
- Closer adjustmentSetting sweep speed, latch speed and backcheck correctly for the door and its traffic.
- Concealed closer serviceOverhead concealed closers in aluminum storefront doors repaired or replaced.
- Surface closer replacementNew surface mounted closers sized correctly for door width and weight.
- Hold-open arm serviceRepairing and adjusting hold-open functions.
One call gets you an answer.We will tell you what is wrong and what it takes to fix.
Click to Call (205) 619-2895How a Flomaton door closer repair visit works
- Watch the door close, twiceThe speed of the last few inches and the first few tells us most of what we need to know before we touch a valve.
- Rule out the door before blaming the closerA door binding on the frame makes a perfectly good closer look weak, and turning the closer up is the wrong answer. On the coast we also check every fastener on the opening, because salt finds plated screws long before it touches the door itself.
- Adjust before replacingMost closer complaints are solved with valve adjustment, and we do that first.
- Size the replacement properlyCloser size depends on door width and weight and on whether it faces exterior wind. Undersized closers fail early.
- Set for people, not just for latchingThe door needs to close and latch every time and still be openable by someone with limited strength.
- Fit a stop if it needs oneA closer with no backcheck and no stop will eventually put the handle through the wall and tear its own fixings out.
One call gets you an answer.We will tell you what is wrong and what it takes to fix.
Click to Call (205) 619-2895What affects the cost of door closer repair in Flomaton
Every door closer repair call in Escambia County is a little different, and the cost follows what the door actually needs:
- adjustment versus rebuild versus full replacement
- fire rating and accessibility compliance requirements
- whether the mounting has to be repaired or reinforced
- adding overhead stops or hold-open functions
- surface, concealed or floor mounted closer type
Call and describe what the door is doing. In most cases we can tell you over the phone which of those applies to you before anyone drives out to Flomaton.
One call gets you an answer.We will tell you what is wrong and what it takes to fix.
Click to Call (205) 619-2895Areas we cover for door closer repair in Flomaton
Flomaton coverage runs across Main Street and the US-29 corridor, and out to the areas around the Flomaton depot and the Florida state line.
We also cover the nearby Escambia County and the Alabama Gulf Coast communities listed further down this page.
Get a real diagnosis, not a sales pitch.We fix doors for a living.
Click to Call (205) 619-2895Door closer repair in Flomaton: questions we get asked
The closer arm on our door is bent. What causes that?
The door was opened past its limit, usually by wind catching it or by someone pushing it hard against a wall. Replacing the arm without adding an overhead stop just means it happens again.
How long do door closers last?
A good quality closer on a properly hung door can run for well over a decade. A cheap closer on a heavy exterior door in Flomaton might last a couple of years, especially if it is fighting a misaligned door.
What size closer do I need?
It depends on the door width, weight and exposure. Exterior doors in Escambia County also need to handle wind, and an undersized closer on a windy exposure gets destroyed.
Do door closers need different settings in summer and winter?
They can. The hydraulic fluid thins in heat and thickens in cold, so a closer set perfectly in Flomaton in August may close too slowly in January. Quality closers hold their setting better across the temperature swing.
Why is our door so heavy to open now?
Somebody has probably turned the closer up to force a door that was not latching. That is treating a symptom, and it makes the door difficult for customers and staff. Fix the latching problem and the closer can come back to a reasonable setting.
Do you work on floor closers?
Yes. Floor closers under heavy entrance doors are serviceable, though they are more involved to work on because the unit sits in the floor.
Not sure whether it is a repair or a replacement?Describe the symptoms and we will give you a straight answer.
Click to Call (205) 619-2895Other door repair services in Flomaton
- Sliding Door Repair Flomaton
Sticking, jumping, or dragging sliding glass doors put back on smooth-rolling track.
- Door Lock Repair Flomaton
Deadbolts, latches, cylinders and strike alignment repaired on residential and commercial doors.
- Door Frame Repair Flomaton
Rotted, split, kicked-in and out-of-square frames rebuilt so the door fits again.
- Door Handle Repair Flomaton
Loose, broken and seized handles, knobs and levers repaired or replaced.
- Door Hinge Repair Flomaton
Sagging doors, stripped hinge screws, squealing pins and worn knuckles put right.
- Patio Door Repair Flomaton
Sliding, French and multi-panel patio doors repaired, realigned and resealed.
- Door Glass Repair Flomaton
Broken, cracked and fogged door glass replaced, including tempered and insulated units.
- Commercial Door Repair Flomaton
Hollow metal, aluminum and high-traffic doors kept working for businesses and property managers.
- Storefront Door Repair Flomaton
Aluminum storefront entrances repaired: pivots, closers, locks, glass and alignment.
- Automatic Door Repair Flomaton
Automatic sliding and swing doors, operators, sensors and safety systems serviced.
- Screen Door Repair Flomaton
Sliding screens, storm doors and screen panels rescreened, rerolled and rehung.
- French Door Repair Flomaton
Sagging, dragging and drafty French doors realigned, resealed and rehung.
- Interior Door Repair Flomaton
Sticking, sagging, rattling and damaged interior doors made to work properly again.
- Exterior Door Repair Flomaton
Front and back entry doors resealed, realigned, reinforced and repaired.
- Window Repair Flomaton
Sashes, balances, glass, seals and hardware repaired on residential and commercial windows.
Door Closer Repair near Flomaton
We cover the surrounding Escambia County and the Alabama Gulf Coast communities as well:
- Door Closer Repair in Atmore
- Door Closer Repair in Brewton
- Door Closer Repair in East Brewton
- Door Closer Repair in Daphne
- Door Closer Repair in Fairhope
- Door Closer Repair in Foley
- Door Closer Repair in Gulf Shores
- Door Closer Repair in Orange Beach
All door repair services in Flomaton · Door Closer Repair across Alabama · All Alabama service areas
Need it looked at soon?Call and we will tell you honestly when we can get there.
Click to Call (205) 619-2895