Alabama Sliding Door Repair Statewide door & window repair Click to Call (205) 619-2895
Home Alabama Lanett Screen Door Repair

Lanett, Alabama · Chambers County

Screen Door Repair in Lanett, AL

Screen doors get treated as disposable, which is a shame because most of what fails on them costs very little to fix. Mesh, spline, rollers and corner keys are all replaceable, and the frame is usually fine.

  • Repair first, replace last
  • Homes & businesses
  • Chambers County covered
  • Straight answers on the phone

Click to Call (205) 619-2895

Screen Door Repair diagram
Screen Door Repair — Lanett, Alabama

Whether you are near the Chattahoochee River, over in Downtown Lanett, or on the South Broad Avenue side of Lanett, it is the same coverage and the same crew.

Door problems in Lanett tend to sort into two groups: older homes where the frames and jambs have taken decades of weather, and newer builds where the hardware was the cheapest part of the package and has already given up.

One call gets you an answer.We will tell you what is wrong and what it takes to fix.

Click to Call (205) 619-2895

Common screen door repair faults in Chambers County

These are the screen door repair faults we are called out to most often in Lanett. If you recognise one, the underlying cause is usually the second half of the line.

  • Mesh sagging and billowingLoose or dried-out spline that is no longer holding the mesh tight.
  • A retractable screen will not fully retractA fouled or fatigued spring cassette, or debris in the guide channel.
  • The storm door blew open and bent the armNo wind chain fitted, or a failed hold-open washer on the closer.
  • The frame is bent or racked out of squareUsually from being forced back into a track it was not sitting right in.
  • Sun damage has made the mesh brittleUV degradation, common on south and west facing doors.
  • The screen track itself is damagedThe channel the screen rides in has been bent or worn.

Tell us what the door is doing and we will tell you what it needs.No guesswork over the phone, no pressure.

Click to Call (205) 619-2895

What Lanett weather does to screen door repair

East central Alabama runs humid most of the year with mild winters, so wood movement is gradual but constant rather than dramatic.

Humidity corrodes the steel components in screen rollers and rusts the tiny springs in adjusters, so screens seize up and drop out of their track.

Grit accumulating in the screen track is the reason most screens get hard to move, and it wears the small plastic rollers far faster than the weight of the panel ever would.

We see the pattern often enough across Chambers County that we usually know what we are looking at before we arrive.

Local factors we account for in Lanett: sustained humidity and grit and dust — typical of east central Alabama.

Need it looked at soon?Call and we will tell you honestly when we can get there.

Click to Call (205) 619-2895

What a screen door repair call covers

  • Frame repair and squaringStraightening bent frames and replacing corner keys.
  • Screen roller replacementNew rollers and adjusters so a sliding screen tracks properly and stays in.
  • Screen track repairRepairing or replacing the channel the screen rides in.
  • Hinged screen door repairHinges, latches, closers and screen panels on swinging screen doors.
  • Storm door repairClosers, latches, hinges, sweeps and glass or screen inserts on storm doors.
  • Solar screen installationSolar mesh to cut heat gain through screened openings.
  • Sliding screen replacementCustom-built replacement screen panels where the original is beyond repair.

One call gets you an answer.We will tell you what is wrong and what it takes to fix.

Click to Call (205) 619-2895

How we approach screen door repair

  1. Work out whether it is the screen or the trackA screen that jams is often a track problem. Replacing rollers in a damaged track fixes nothing.
  2. Check the frame for squareA racked frame will never slide properly. Corner keys get reset before anything else is considered. Jobs in this part of the state get their weatherstrip assessed for heat and cold, since both extremes show up here.
  3. Choose the right meshStandard fiberglass, pet-resistant, solar or fine mesh, depending on pets, sun exposure and what insects you are dealing with.
  4. Rescreen with correct tensionEven tension and properly seated spline so the mesh does not sag or pull out of the channel.
  5. Fit and adjust the rollersBoth rollers set so the frame runs level and the latch meets its keeper without lifting.
  6. Check it stays in the trackA screen that can be lifted out is one gust from being on the patio, so the height and the guides get set properly.

Need it looked at soon?Call and we will tell you honestly when we can get there.

Click to Call (205) 619-2895

What affects the cost of screen door repair in Lanett

We would rather tell you what drives the price than quote a number that turns out to be wrong once we see the door. On a screen door repair job in Lanett, the main variables are these:

  • the mesh type chosen, from standard fiberglass to pet-resistant and solar
  • the size of the panel
  • custom-built replacement panels where the original is not repairable
  • storm door hardware such as closers and latches
  • roller and track work in addition to the screen itself

Call and describe what the door is doing. In most cases we can tell you over the phone which of those applies to you before anyone drives out to Lanett.

Most doors we see are repairable.Call and find out before you price a replacement.

Click to Call (205) 619-2895

Areas we cover for screen door repair in Lanett

Lanett coverage runs across Downtown Lanett, South Broad Avenue and the US-29 corridor, and out to the areas around the Chattahoochee River, West Point Lake and the Georgia line at West Point.

Service area: Lanett, Chambers County, Alabama — and the surrounding communities.

We also cover the nearby Chambers County and east central Alabama communities listed further down this page.

Get a real diagnosis, not a sales pitch.We fix doors for a living.

Click to Call (205) 619-2895

Screen door repair in Lanett: questions we get asked

How long does a rescreen take?

Usually under an hour per panel in Lanett. If the frame needs straightening or corner keys replaced, allow a bit longer.

Is it worth rescreening or should I just buy a new screen door?

Rescreening is far cheaper and the frame is usually fine. New panels only make sense when the frame is bent beyond straightening or the corners are gone.

The screen slides hard even though it is not falling out. What is wrong?

Either the rollers have seized or the track is packed with debris. In Lanett the track collects a surprising amount of grit, and it acts like grinding paste on the rollers.

Can a bent screen frame be straightened?

Sometimes. Light aluminum frames can often be brought back to square, but a badly racked frame is usually better replaced, and a custom panel is not expensive.

Can you make a screen that keeps out the tiny biting insects?

Yes, fine no-see-um mesh. It has a much tighter weave, and in the parts of Chambers County near water it is the only thing that actually works against the smallest biters.

What mesh should I use if I have dogs?

Pet-resistant mesh, which is a heavier vinyl-coated polyester, and often a pet grille across the lower section. Standard fiberglass will not survive a dog that pushes against it.

Get a real diagnosis, not a sales pitch.We fix doors for a living.

Click to Call (205) 619-2895

Other door repair services in Lanett


Screen Door Repair near Lanett

We cover the surrounding Chambers County and east central Alabama communities as well:

All door repair services in Lanett  ·  Screen Door Repair across Alabama  ·  All Alabama service areas

One call gets you an answer.We will tell you what is wrong and what it takes to fix.

Click to Call (205) 619-2895
Click to Call (205) 619-2895Tap to speak to a door repair tech now