Alabama Sliding Door Repair Statewide door & window repair Click to Call (205) 619-2895
Home Alabama Marbury Screen Door Repair

Marbury, Alabama · Autauga County

Screen Door Repair in Marbury, AL

Screen doors get treated as disposable, which is a shame because most of what fails on them costs very little to fix. Mesh, spline, rollers and corner keys are all replaceable, and the frame is usually fine.

  • Repair first, replace last
  • Homes & businesses
  • Autauga County covered
  • Straight answers on the phone

Click to Call (205) 619-2895

Screen Door Repair diagram
Screen Door Repair — Marbury, Alabama

Our territory takes in Marbury and the communities around it in Autauga County, so calls from the US-31 corridor, County Road 4 and out by the Marbury schools campus all get the same response.

Marbury has enough older housing stock that repair almost always beats replacement here, and enough new construction that we spend a lot of time on hardware that failed early.

One call gets you an answer.We will tell you what is wrong and what it takes to fix.

Click to Call (205) 619-2895

The screen door repair problems we see most in Marbury

These are the screen door repair faults we are called out to most often in Marbury. If you recognise one, the underlying cause is usually the second half of the line.

  • The storm door blew open and bent the armNo wind chain fitted, or a failed hold-open washer on the closer.
  • The mesh is torn or has holesStraightforward rescreen, and worth doing before the tear spreads.
  • The screen door falls out of the trackWorn screen rollers or a bent top rail that no longer holds the panel in the head channel.
  • Sun damage has made the mesh brittleUV degradation, common on south and west facing doors.
  • The screen tilts and jams halfway acrossOne roller seized while the other still turns, so the frame is walking out of square.
  • It takes real effort to slideSeized rollers or a track full of packed debris.

Tell us what the door is doing and we will tell you what it needs.No guesswork over the phone, no pressure.

Click to Call (205) 619-2895

What we see on screen door repair around Autauga County

Remnants of Gulf systems still carry serious rain this far inland, and doors on the south and west sides of a house take the brunt of it.

Rain drives grit and organic debris into the screen track, and that debris packs down under the rollers and holds moisture against the frame.

Ultraviolet light is what kills screen mesh. Standard fiberglass on a south or west exposure goes brittle and crumbles at the edges, which is why solar mesh is worth the difference on sunny elevations.

It is why the same repair done properly in Marbury lasts, and the same repair done cheaply does not.

Local factors we account for in Marbury: heavy rainfall and sun and heat load — typical of the River Region.

Most doors we see are repairable.Call and find out before you price a replacement.

Click to Call (205) 619-2895

What we repair

  • Frame repair and squaringStraightening bent frames and replacing corner keys.
  • Screen track repairRepairing or replacing the channel the screen rides in.
  • Sliding screen replacementCustom-built replacement screen panels where the original is beyond repair.
  • Screen roller replacementNew rollers and adjusters so a sliding screen tracks properly and stays in.
  • Handle and latch replacementNew pulls and latches on screen and storm doors.
  • Screen enclosure and porch panel repairRescreening porch and patio enclosure panels.
  • Storm door repairClosers, latches, hinges, sweeps and glass or screen inserts on storm doors.

Most doors we see are repairable.Call and find out before you price a replacement.

Click to Call (205) 619-2895

Our screen door repair process

  1. Work out whether it is the screen or the trackA screen that jams is often a track problem. Replacing rollers in a damaged track fixes nothing.
  2. Assess the frame for squareA racked frame will not sit in the track properly no matter what mesh is in it.
  3. Choose the right meshStandard fiberglass, pet-resistant, solar or fine mesh, depending on pets, sun exposure and what insects you are dealing with.
  4. Rescreen with correct tensionEven tension and properly seated spline so the mesh does not sag or pull out of the channel. Openings here get assessed for drainage as well as alignment, since summer storms find any weakness at the sill.
  5. Fit and adjust the rollersSet so the panel rides smoothly and stays captured in the head channel.
  6. Test the full travelEnd to end, several times, with the latch engaging cleanly at the close.

Not sure whether it is a repair or a replacement?Describe the symptoms and we will give you a straight answer.

Click to Call (205) 619-2895

What affects the cost of screen door repair in Marbury

Every screen door repair call in Autauga County is a little different, and the cost follows what the door actually needs:

  • roller and track work in addition to the screen itself
  • the mesh type chosen, from standard fiberglass to pet-resistant and solar
  • storm door hardware such as closers and latches
  • rescreening versus repairing or replacing the frame
  • custom-built replacement panels where the original is not repairable

Call and describe what the door is doing. In most cases we can tell you over the phone which of those applies to you before anyone drives out to Marbury.

Not sure whether it is a repair or a replacement?Describe the symptoms and we will give you a straight answer.

Click to Call (205) 619-2895

Areas we cover for screen door repair in Marbury

We work throughout Marbury, including the US-31 corridor and County Road 4. If you are near the Marbury schools campus and Lake Jordan nearby, that is inside our normal service area.

Service area: Marbury, Autauga County, Alabama — and the surrounding communities.

We also cover the nearby Autauga County and the River Region communities listed further down this page.

One call gets you an answer.We will tell you what is wrong and what it takes to fix.

Click to Call (205) 619-2895

Screen door repair in Marbury: questions we get asked

What mesh should I use if I have dogs?

Pet-resistant mesh, which is a heavier vinyl-coated polyester, and often a pet grille across the lower section. Standard fiberglass will not survive a dog that pushes against it.

Can a bent screen frame be straightened?

Sometimes. Light aluminum frames can often be brought back to square, but a badly racked frame is usually better replaced, and a custom panel is not expensive.

My screen mesh has gone brittle and crumbles. What happened?

UV exposure. Screens on the south and west sides of a house in Marbury take a lot of sun, and standard fiberglass mesh eventually degrades. Solar mesh lasts longer and cuts heat at the same time.

Is it worth rescreening or should I just buy a new screen door?

Rescreening is far cheaper and the frame is usually fine. New panels only make sense when the frame is bent beyond straightening or the corners are gone.

Do you repair storm doors as well as screens?

Yes, including closers, latches, sweeps, hinges and glass or screen inserts. Storm door closers that have torn out of the frame after a gust are one of the most common calls.

How long does a rescreen take?

Usually under an hour per panel in Marbury. If the frame needs straightening or corner keys replaced, allow a bit longer.

One call gets you an answer.We will tell you what is wrong and what it takes to fix.

Click to Call (205) 619-2895

Other door repair services in Marbury


Screen Door Repair near Marbury

We cover the surrounding Autauga County and the River Region communities as well:

All door repair services in Marbury  ·  Screen Door Repair across Alabama  ·  All Alabama service areas

Broken, stuck, or will not lock?Talk to someone who works on these every day.

Click to Call (205) 619-2895
Click to Call (205) 619-2895Tap to speak to a door repair tech now