Alabama Sliding Door Repair Statewide door & window repair Click to Call (205) 619-2895
Home Alabama Redland Screen Door Repair

Redland, Alabama · Elmore County

Screen Door Repair in Redland, AL

Screen doors get treated as disposable, which is a shame because most of what fails on them costs very little to fix. Mesh, spline, rollers and corner keys are all replaceable, and the frame is usually fine.

  • Repair first, replace last
  • Homes & businesses
  • Elmore County covered
  • Straight answers on the phone

Click to Call (205) 619-2895

Screen Door Repair diagram
Screen Door Repair — Redland, Alabama

Between Redland proper, the the Redland Road corridor area and the newer building out toward Rifle Range Road, we stay busy in Elmore County, and Millbrook is close enough that we are often nearby.

The mix of housing here matters for door work. Older Redland homes have wood frames and hardware worth repairing rather than replacing, while newer construction tends to have vinyl and aluminum systems where the moving parts wear out long before anything else does.

Tell us what the door is doing and we will tell you what it needs.No guesswork over the phone, no pressure.

Click to Call (205) 619-2895

The screen door repair problems we see most in Redland

These are the screen door repair faults we are called out to most often in Redland. If you recognise one, the underlying cause is usually the second half of the line.

  • The storm door blew open and bent the armNo wind chain fitted, or a failed hold-open washer on the closer.
  • Sun damage has made the mesh brittleUV degradation, common on south and west facing doors.
  • Corners have come apartFailed corner keys, which are replaceable.
  • The storm door will not stay closedFailed closer or latch on a hinged storm door.
  • The latch does not line upThe door has sagged or the frame has moved.
  • The screen track itself is damagedThe channel the screen rides in has been bent or worn.

Broken, stuck, or will not lock?Talk to someone who works on these every day.

Click to Call (205) 619-2895

What we see on screen door repair around Elmore County

Summers here are long and genuinely hot, and afternoon thunderstorms arrive most days in July. Anything that relies on a rubber seal ages fast under that combination of UV and heat.

Humidity corrodes the steel components in screen rollers and rusts the tiny springs in adjusters, so screens seize up and drop out of their track.

Ultraviolet light is what kills screen mesh. Standard fiberglass on a south or west exposure goes brittle and crumbles at the edges, which is why solar mesh is worth the difference on sunny elevations.

We see the pattern often enough across Elmore County that we usually know what we are looking at before we arrive.

Local factors we account for in Redland: sustained humidity and sun and heat load — typical of the River Region.

Broken, stuck, or will not lock?Talk to someone who works on these every day.

Click to Call (205) 619-2895

What a screen door repair call covers

  • Pet mesh and pet grille installationHeavy-duty mesh and lower grilles for doors that dogs push against.
  • Screen enclosure and porch panel repairRescreening porch and patio enclosure panels.
  • Frame repair and squaringStraightening bent frames and replacing corner keys.
  • Hinged screen door repairHinges, latches, closers and screen panels on swinging screen doors.
  • Wind chain and closer installationProtecting storm doors from wind damage.
  • Solar screen installationSolar mesh to cut heat gain through screened openings.
  • Sliding screen replacementCustom-built replacement screen panels where the original is beyond repair.

One call gets you an answer.We will tell you what is wrong and what it takes to fix.

Click to Call (205) 619-2895

How we approach screen door repair

  1. Check whether it is the screen or the trackA screen that keeps coming out is usually a roller and track problem, and rescreening it would not solve anything.
  2. Assess the frame for squareA racked frame will not sit in the track properly no matter what mesh is in it.
  3. Choose the right meshStandard fiberglass, pet-resistant, solar or fine mesh, depending on pets, sun exposure and what insects you are dealing with.
  4. Rescreen with correct tensionEven tension and properly seated spline so the mesh does not sag or pull out of the channel.
  5. Fit and adjust the rollersSet so the panel rides smoothly and stays captured in the head channel.
  6. Check it stays in the trackA screen that can be lifted out is one gust from being on the patio, so the height and the guides get set properly. Openings here get assessed for drainage as well as alignment, since summer storms find any weakness at the sill.

Need it looked at soon?Call and we will tell you honestly when we can get there.

Click to Call (205) 619-2895

What affects the cost of screen door repair in Redland

Pricing on screen door repair depends on what has actually failed, which is why we talk it through before quoting. These are the things that move the number:

  • custom-built replacement panels where the original is not repairable
  • storm door hardware such as closers and latches
  • rescreening versus repairing or replacing the frame
  • roller and track work in addition to the screen itself
  • the mesh type chosen, from standard fiberglass to pet-resistant and solar

Call and describe what the door is doing. In most cases we can tell you over the phone which of those applies to you before anyone drives out to Redland.

Broken, stuck, or will not lock?Talk to someone who works on these every day.

Click to Call (205) 619-2895

Areas we cover for screen door repair in Redland

Coverage in Redland takes in the Redland Road corridor and Rifle Range Road, plus everything around Wetumpka just north and the Coosa River valley.

Service area: Redland, Elmore County, Alabama — and the surrounding communities.

We also cover the nearby Elmore County and the River Region communities listed further down this page.

Need it looked at soon?Call and we will tell you honestly when we can get there.

Click to Call (205) 619-2895

Screen door repair in Redland: questions we get asked

Can you make a screen that keeps out the tiny biting insects?

Yes, fine no-see-um mesh. It has a much tighter weave, and in the parts of Elmore County near water it is the only thing that actually works against the smallest biters.

My sliding screen keeps falling out. Why does it keep happening?

The rollers have worn down so the panel is riding too low and the top rail no longer sits in the head channel. Lifting it back in without replacing the rollers means it will come out again, usually within days.

What mesh should I use if I have dogs?

Pet-resistant mesh, which is a heavier vinyl-coated polyester, and often a pet grille across the lower section. Standard fiberglass will not survive a dog that pushes against it.

Is it worth rescreening or should I just buy a new screen door?

Rescreening is far cheaper and the frame is usually fine. New panels only make sense when the frame is bent beyond straightening or the corners are gone.

Can a bent screen frame be straightened?

Sometimes. Light aluminum frames can often be brought back to square, but a badly racked frame is usually better replaced, and a custom panel is not expensive.

How long does a rescreen take?

Usually under an hour per panel in Redland. If the frame needs straightening or corner keys replaced, allow a bit longer.

Broken, stuck, or will not lock?Talk to someone who works on these every day.

Click to Call (205) 619-2895

Other door repair services in Redland


Screen Door Repair near Redland

We cover the surrounding Elmore County and the River Region communities as well:

All door repair services in Redland  ·  Screen Door Repair across Alabama  ·  All Alabama service areas

Need it looked at soon?Call and we will tell you honestly when we can get there.

Click to Call (205) 619-2895
Click to Call (205) 619-2895Tap to speak to a door repair tech now