We cover Taylor and the rest of Houston County, from the AL-52 corridor across to the Chattahoochee River, and we are out this way often enough that Rehobeth and Cottonwood are on the same run.
The mix of housing here matters for door work. Older Taylor homes have wood frames and hardware worth repairing rather than replacing, while newer construction tends to have vinyl and aluminum systems where the moving parts wear out long before anything else does.
Not sure whether it is a repair or a replacement?Describe the symptoms and we will give you a straight answer.
Click to Call (205) 619-2895What Taylor customers call us about
These are the door closer repair faults we are called out to most often in Taylor. If you recognise one, the underlying cause is usually the second half of the line.
- Mounting screws have pulled the door skin outwardA closer fitted to a hollow door without a reinforcing plate.
- The hold-open function has stopped workingWorn hold-open mechanism in the arm.
- There is a knock at the end of the opening swingNo backcheck, or backcheck that has failed, so the arm is bottoming out.
- A fire door that stays openSerious safety issue: failed closer or a hold-open that should be releasing.
- The door needs more force to open than it used toRising internal friction, and on an accessible entrance this can push opening force out of compliance.
- Screws pulling out of the door or frameCloser mounting has failed, often because the closer was undersized for the door.
Most doors we see are repairable.Call and find out before you price a replacement.
Click to Call (205) 619-2895Taylor conditions and door closer repair
Sandy soil here drains fast but also shifts, and blowing sand is a constant presence in sliding door tracks and screen channels.
Wind is the main killer of door closers: a gust drives the door past its opening limit, bends the arm and often tears the mounting out of the door, which is why an overhead stop is not optional on an exposed door.
Water running down a door face and into a surface closer body corrodes the internals and the mounting fasteners, and a closer that has been wet repeatedly usually fails at the seal.
None of it is a reason to replace a door. It is a reason to use the right parts and set the door up correctly in the first place.
Local factors we account for in Taylor: storm wind and heavy rainfall — typical of the Wiregrass.
One call gets you an answer.We will tell you what is wrong and what it takes to fix.
Click to Call (205) 619-2895Our door closer repair services in Taylor
- Surface closer replacementNew surface mounted closers sized correctly for door width and weight.
- Fire door closer complianceMaking sure fire-rated openings close and latch fully every time.
- Spring hinge and closer conversionReplacing failed spring hinges with a proper closer where the door needs it.
- Wind and stop protectionFitting overhead stops so wind cannot destroy the closer arm.
- Accessibility force adjustmentSetting opening force to meet accessibility requirements without losing reliable latching.
- Concealed closer serviceOverhead concealed closers in aluminum storefront doors repaired or replaced.
- Floor closer repairServicing and replacing floor-mounted closers under heavy entrance doors.
Not sure whether it is a repair or a replacement?Describe the symptoms and we will give you a straight answer.
Click to Call (205) 619-2895Our door closer repair process
- Watch the door close, twiceThe speed of the last few inches and the first few tells us most of what we need to know before we touch a valve.
- Rule out the door firstA closer struggling against a binding door is not a faulty closer. Hinges and reveal get checked before we condemn the unit.
- Adjust before replacingMany closers we are called to are serviceable and simply out of adjustment. That is a much smaller job and we say so.
- Size the replacement properlyDoor width, weight and exposure decide the power size. An undersized closer will not shut the door; an oversized one shuts out anyone who is not strong. We look at how much sand is reaching the opening, since sometimes a sweep or a threshold change does more good than new hardware.
- Set for people, not just for latchingThe door needs to close and latch every time and still be openable by someone with limited strength.
- Fit a stop if it needs oneA closer with no backcheck and no stop will eventually put the handle through the wall and tear its own fixings out.
Not sure whether it is a repair or a replacement?Describe the symptoms and we will give you a straight answer.
Click to Call (205) 619-2895What affects the cost of door closer repair in Taylor
There is no single price for door closer repair in Taylor, because two doors with identical symptoms can need very different work. Here is what makes the difference:
- the size and weight of the door and its exposure to wind
- adjustment versus rebuild versus full replacement
- fire rating and accessibility compliance requirements
- whether the mounting has to be repaired or reinforced
- adding overhead stops or hold-open functions
Call and describe what the door is doing. In most cases we can tell you over the phone which of those applies to you before anyone drives out to Taylor.
Get a real diagnosis, not a sales pitch.We fix doors for a living.
Click to Call (205) 619-2895Areas we cover for door closer repair in Taylor
Taylor coverage runs across the AL-52 corridor, and out to the areas around Dothan nearby and the Wiregrass farmland.
We also cover the nearby Houston County and the Wiregrass communities listed further down this page.
Most doors we see are repairable.Call and find out before you price a replacement.
Click to Call (205) 619-2895Door closer repair in Taylor: questions we get asked
How long do door closers last?
A good quality closer on a properly hung door can run for well over a decade. A cheap closer on a heavy exterior door in Taylor might last a couple of years, especially if it is fighting a misaligned door.
Do door closers need different settings in summer and winter?
They can. The hydraulic fluid thins in heat and thickens in cold, so a closer set perfectly in Taylor in August may close too slowly in January. Quality closers hold their setting better across the temperature swing.
There is oil dripping from my door closer. Can it be refilled?
No. Closers are sealed units, and once the seal fails the closer is finished. Refilling is not possible on standard units and the unit needs replacing.
Do you work on floor closers?
Yes. Floor closers under heavy entrance doors are serviceable, though they are more involved to work on because the unit sits in the floor.
Can I adjust the closer myself?
The valves are accessible, but they are easy to over-adjust and some closers will lose their spring tension entirely if a valve is backed out too far. If you are not sure which valve does what, it is worth a call first.
Our fire door is propped open. Is that a problem?
Yes, and it is one of the most common code violations we see. A fire door that cannot close and latch is not doing anything. If it gets propped because it is hard to use, that is the problem to solve.
Not sure whether it is a repair or a replacement?Describe the symptoms and we will give you a straight answer.
Click to Call (205) 619-2895Other door repair services in Taylor
- Sliding Door Repair Taylor
Sticking, jumping, or dragging sliding glass doors put back on smooth-rolling track.
- Door Lock Repair Taylor
Deadbolts, latches, cylinders and strike alignment repaired on residential and commercial doors.
- Door Frame Repair Taylor
Rotted, split, kicked-in and out-of-square frames rebuilt so the door fits again.
- Door Handle Repair Taylor
Loose, broken and seized handles, knobs and levers repaired or replaced.
- Door Hinge Repair Taylor
Sagging doors, stripped hinge screws, squealing pins and worn knuckles put right.
- Patio Door Repair Taylor
Sliding, French and multi-panel patio doors repaired, realigned and resealed.
- Door Glass Repair Taylor
Broken, cracked and fogged door glass replaced, including tempered and insulated units.
- Commercial Door Repair Taylor
Hollow metal, aluminum and high-traffic doors kept working for businesses and property managers.
- Storefront Door Repair Taylor
Aluminum storefront entrances repaired: pivots, closers, locks, glass and alignment.
- Automatic Door Repair Taylor
Automatic sliding and swing doors, operators, sensors and safety systems serviced.
- Screen Door Repair Taylor
Sliding screens, storm doors and screen panels rescreened, rerolled and rehung.
- French Door Repair Taylor
Sagging, dragging and drafty French doors realigned, resealed and rehung.
- Interior Door Repair Taylor
Sticking, sagging, rattling and damaged interior doors made to work properly again.
- Exterior Door Repair Taylor
Front and back entry doors resealed, realigned, reinforced and repaired.
- Window Repair Taylor
Sashes, balances, glass, seals and hardware repaired on residential and commercial windows.
Door Closer Repair near Taylor
We cover the surrounding Houston County and the Wiregrass communities as well:
- Door Closer Repair in Rehobeth
- Door Closer Repair in Cottonwood
- Door Closer Repair in Webb
- Door Closer Repair in Ashford
- Door Closer Repair in Cowarts
- Door Closer Repair in Kinsey
- Door Closer Repair in Greenville
- Door Closer Repair in Georgiana
All door repair services in Taylor · Door Closer Repair across Alabama · All Alabama service areas
Get a real diagnosis, not a sales pitch.We fix doors for a living.
Click to Call (205) 619-2895