Alabama Sliding Door Repair Statewide door & window repair Click to Call (205) 619-2895
Home Alabama Uniontown Storefront Door Repair

Uniontown, Alabama · Perry County

Storefront Door Repair in Uniontown, AL

Storefront doors are built from a small number of standardized parts, which is good news. Pivots, closers, deadlatches, bottom rails and thresholds are all serviceable, and a tired entrance can usually be brought back to feeling like new.

  • Repair first, replace last
  • Homes & businesses
  • Perry County covered
  • Straight answers on the phone

Click to Call (205) 619-2895

Storefront Door Repair diagram
Storefront Door Repair — Uniontown, Alabama

Our Uniontown customers are spread from Main Street to the AL-61 corridor and out around the Uniontown historic district, and we serve the surrounding Perry County communities on the same schedule.

A lot of what we see in Perry County comes down to age. Houses built decades ago have solid frames with tired hardware; houses built recently have sound hardware in frames that are still settling.

Get a real diagnosis, not a sales pitch.We fix doors for a living.

Click to Call (205) 619-2895

The storefront door repair problems we see most in Uniontown

These are the storefront door repair faults we are called out to most often in Uniontown. If you recognise one, the underlying cause is usually the second half of the line.

  • The concealed closer in the floor has slowed noticeablyContamination or fluid loss in the floor unit, which needs the door lifted to reach.
  • The closer leaks oil or has stopped closing the doorFailed concealed overhead or floor closer.
  • The push bar or pull handle is looseFasteners working out of the aluminum stile.
  • The bottom rail is loose or has separatedThe rail-to-glass connection has failed, which is common on older entrances.
  • The lock cylinder is stiff or seizedWorn mortise cylinder, often with grit or corrosion in it.
  • Customers have to pull hard to open the doorOver-tensioned closer, worn pivots or a door binding in the frame.

One call gets you an answer.We will tell you what is wrong and what it takes to fix.

Click to Call (205) 619-2895

Uniontown conditions and storefront door repair

The wet winter and dry late-summer cycle here is severe enough that a door adjusted perfectly in February can bind badly by September.

Driving rain gets under a storefront door with a worn sweep and across the floor inside, and the water that collects in the threshold corrodes the bottom pivot housing.

Building movement racks an aluminum storefront frame, and because these doors are set to fine tolerances, even small movement stops the deadlatch reaching its keeper cleanly.

We factor that in on every storefront door repair job around the Uniontown historic district and the rest of Uniontown.

Local factors we account for in Uniontown: heavy rainfall and soil movement — typical of the Black Belt.

Get a real diagnosis, not a sales pitch.We fix doors for a living.

Click to Call (205) 619-2895

What we repair

  • Threshold and sweep replacementSealing the bottom of the entrance against water and air.
  • Weatherstrip and meeting stile sealsNew seals on pairs of doors and along jambs.
  • Bottom rail repairRe-securing or replacing bottom rails and resetting the glass properly.
  • Storefront glass replacementTempered glass replacement for doors, sidelites and transoms.
  • Frame repair after forced entryStraightening and reinforcing damaged aluminum frames.
  • Closer repair and replacementConcealed overhead, surface and floor closers repaired or replaced and correctly adjusted.
  • Push and pull hardwareReplacing handles, push bars and offset pulls, including ADA-compliant hardware.

Need it looked at soon?Call and we will tell you honestly when we can get there.

Click to Call (205) 619-2895

Our storefront door repair process

  1. Look at the pivot firstOn a sagging storefront door the bottom pivot is the usual culprit, and everything else you might blame is a symptom of it.
  2. Test the closer on its ownDisconnecting the arm tells us instantly whether the door is heavy or the closer is failing. They need different work.
  3. Secure before you finishDeadlatch function comes first, because a shop that cannot lock its front door cannot close.
  4. Reset and square the doorPivots set, door squared in the opening, latch engaging cleanly without lifting or pulling. Through the Black Belt we check whether the opening has moved with the clay before we adjust anything, or the adjustment goes out again by next season.
  5. Set the closer to codeOpening force and closing speed set to accessible limits, with the latch speed adjusted so it closes without slamming.
  6. Work to your scheduleWe plan around trading hours so the entrance is not out of service during business.

Broken, stuck, or will not lock?Talk to someone who works on these every day.

Click to Call (205) 619-2895

What affects the cost of storefront door repair in Uniontown

There is no single price for storefront door repair in Uniontown, because two doors with identical symptoms can need very different work. Here is what makes the difference:

  • concealed and floor closers versus surface mounted units
  • after-hours or emergency scheduling
  • hardware grade and ADA compliance requirements
  • glass replacement and whether board-up is needed first
  • frame damage from forced entry

Call and describe what the door is doing. In most cases we can tell you over the phone which of those applies to you before anyone drives out to Uniontown.

Tell us what the door is doing and we will tell you what it needs.No guesswork over the phone, no pressure.

Click to Call (205) 619-2895

Areas we cover for storefront door repair in Uniontown

Uniontown coverage runs across Main Street and the AL-61 corridor, and out to the areas around the Uniontown historic district and the Black Belt prairie.

Service area: Uniontown, Perry County, Alabama — and the surrounding communities.

We also cover the nearby Perry County and the Black Belt communities listed further down this page.

Get a real diagnosis, not a sales pitch.We fix doors for a living.

Click to Call (205) 619-2895

Storefront door repair in Uniontown: questions we get asked

Why does our storefront door drag at the top corner?

The bottom pivot has worn. The door is pivoting on a bearing that carries its entire weight, and when that wears the door drops and the top outside corner comes down against the frame. Replacing the pivot brings the whole door back into position.

Do you replace storefront glass?

Yes, tempered glass for doors, sidelites and transoms. Board-up happens first so you can trade, and the glass follows once the unit is made.

Can you fix the door so it does not slam on customers?

Yes. That is closer adjustment, and it also needs to meet accessibility requirements for opening force. A properly set closer should let a customer through comfortably and still latch the door every time.

Someone broke in and bent the frame. Is it repairable?

In most cases. Aluminum frames damaged at the lock and strike can be straightened and reinforced. We secure the opening first and then do the permanent repair.

Our front door will not lock at night. Can you come today?

That is exactly the call to make immediately. A Uniontown business that cannot secure its front entrance has a real problem, and getting the deadlatch working again is usually straightforward once we see it.

How often should storefront doors be serviced?

For a busy Uniontown entrance, once or twice a year. Pivots and closers wear gradually, and adjusting them before they fail is far cheaper than an emergency call when the door will not latch.

Get a real diagnosis, not a sales pitch.We fix doors for a living.

Click to Call (205) 619-2895

Other door repair services in Uniontown


Storefront Door Repair near Uniontown

We cover the surrounding Perry County and the Black Belt communities as well:

All door repair services in Uniontown  ·  Storefront Door Repair across Alabama  ·  All Alabama service areas

Get a real diagnosis, not a sales pitch.We fix doors for a living.

Click to Call (205) 619-2895
Click to Call (205) 619-2895Tap to speak to a door repair tech now