We cover Valley and the rest of Chambers County, from Fairfax across to Langdale, and we are out this way often enough that Lanett and LaFayette are on the same run.
Between the established parts of Valley and the newer subdivisions, we see two different kinds of failure: worn-out frames on one side of town and worn-out hardware on the other.
Not sure whether it is a repair or a replacement?Describe the symptoms and we will give you a straight answer.
Click to Call (205) 619-2895When to call about door closer repair
These are the door closer repair faults we are called out to most often in Valley. If you recognise one, the underlying cause is usually the second half of the line.
- The door slamsLatch speed valve out of adjustment, or a closer that has failed internally.
- Screws pulling out of the door or frameCloser mounting has failed, often because the closer was undersized for the door.
- The door does not close the last inchClosing force is too low, or the door is binding on the frame in the final approach.
- The door is very hard to push openCloser over-tensioned, often to compensate for a door that will not latch.
- The closer works well cold and slams when hotFluid thinning with temperature in a unit whose valves can no longer compensate.
- Oil running down the door or the wallFailed seal inside the closer body. The unit needs replacing.
One call gets you an answer.We will tell you what is wrong and what it takes to fix.
Click to Call (205) 619-2895Valley conditions and door closer repair
East central Alabama runs humid most of the year with mild winters, so wood movement is gradual but constant rather than dramatic.
Dust in the arm pivots and the shoe makes the linkage bind, and a binding linkage produces exactly the symptoms people blame on the closer's internal valves.
Humidity swells a wood door so it drags in the frame during the final approach, and turning the closer up to overcome that makes the door punishingly heavy to open while doing nothing about the actual cause.
It is why the same repair done properly in Valley lasts, and the same repair done cheaply does not.
Local factors we account for in Valley: grit and dust and sustained humidity — typical of east central Alabama.
Broken, stuck, or will not lock?Talk to someone who works on these every day.
Click to Call (205) 619-2895What a door closer repair call covers
- Surface closer replacementNew surface mounted closers sized correctly for door width and weight.
- Spring hinge and closer conversionReplacing failed spring hinges with a proper closer where the door needs it.
- Floor closer repairServicing and replacing floor-mounted closers under heavy entrance doors.
- Concealed closer serviceOverhead concealed closers in aluminum storefront doors repaired or replaced.
- Delayed action setupAdding delayed closing for accessibility so people have time to get through.
- Accessibility force adjustmentSetting opening force to meet accessibility requirements without losing reliable latching.
- Closer adjustmentSetting sweep speed, latch speed and backcheck correctly for the door and its traffic.
Most doors we see are repairable.Call and find out before you price a replacement.
Click to Call (205) 619-2895Our door closer repair process
- Watch the door close, twiceThe speed of the last few inches and the first few tells us most of what we need to know before we touch a valve.
- Rule out the door firstA closer struggling against a binding door is not a faulty closer. Hinges and reveal get checked before we condemn the unit. Jobs in this part of the state get their weatherstrip assessed for heat and cold, since both extremes show up here.
- Check for the simple faultsLoose arm fixings, a bent forearm or a seized pinion account for a lot of closers that look dead.
- Size the replacement properlyDoor width, weight and exposure decide the power size. An undersized closer will not shut the door; an oversized one shuts out anyone who is not strong.
- Set for people, not just latchingOpening force is checked so the door is usable by everybody, then latch speed is set so it still closes properly.
- Fit a stop where it is neededA door with no stop will destroy its own closer the first time the wind catches it.
Need it looked at soon?Call and we will tell you honestly when we can get there.
Click to Call (205) 619-2895What affects the cost of door closer repair in Valley
We would rather tell you what drives the price than quote a number that turns out to be wrong once we see the door. On a door closer repair job in Valley, the main variables are these:
- adjustment versus rebuild versus full replacement
- adding overhead stops or hold-open functions
- fire rating and accessibility compliance requirements
- surface, concealed or floor mounted closer type
- the size and weight of the door and its exposure to wind
Call and describe what the door is doing. In most cases we can tell you over the phone which of those applies to you before anyone drives out to Valley.
Need it looked at soon?Call and we will tell you honestly when we can get there.
Click to Call (205) 619-2895Areas we cover for door closer repair in Valley
Our Valley service area includes Fairfax, Langdale, Shawmut and River View and the surrounding Chambers County communities, out around the Chattahoochee Valley mill villages, West Point Lake and the Georgia state line.
We also cover the nearby Chambers County and east central Alabama communities listed further down this page.
One call gets you an answer.We will tell you what is wrong and what it takes to fix.
Click to Call (205) 619-2895Door closer repair in Valley: questions we get asked
Why is our door so heavy to open now?
Somebody has probably turned the closer up to force a door that was not latching. That is treating a symptom, and it makes the door difficult for customers and staff. Fix the latching problem and the closer can come back to a reasonable setting.
How long do door closers last?
A good quality closer on a properly hung door can run for well over a decade. A cheap closer on a heavy exterior door in Valley might last a couple of years, especially if it is fighting a misaligned door.
Can I adjust the closer myself?
The valves are accessible, but they are easy to over-adjust and some closers will lose their spring tension entirely if a valve is backed out too far. If you are not sure which valve does what, it is worth a call first.
My door slams every time. Can that be adjusted?
Almost always. There is a latch speed valve on the closer that controls the last few inches, and it has probably drifted or been set wrong. Adjusting it takes minutes and saves your frame, hinges and hardware from a lot of abuse.
Our fire door is propped open. Is that a problem?
Yes, and it is one of the most common code violations we see. A fire door that cannot close and latch is not doing anything. If it gets propped because it is hard to use, that is the problem to solve.
The closer arm on our door is bent. What causes that?
The door was opened past its limit, usually by wind catching it or by someone pushing it hard against a wall. Replacing the arm without adding an overhead stop just means it happens again.
One call gets you an answer.We will tell you what is wrong and what it takes to fix.
Click to Call (205) 619-2895Other door repair services in Valley
- Sliding Door Repair Valley
Sticking, jumping, or dragging sliding glass doors put back on smooth-rolling track.
- Door Lock Repair Valley
Deadbolts, latches, cylinders and strike alignment repaired on residential and commercial doors.
- Door Frame Repair Valley
Rotted, split, kicked-in and out-of-square frames rebuilt so the door fits again.
- Door Handle Repair Valley
Loose, broken and seized handles, knobs and levers repaired or replaced.
- Door Hinge Repair Valley
Sagging doors, stripped hinge screws, squealing pins and worn knuckles put right.
- Patio Door Repair Valley
Sliding, French and multi-panel patio doors repaired, realigned and resealed.
- Door Glass Repair Valley
Broken, cracked and fogged door glass replaced, including tempered and insulated units.
- Commercial Door Repair Valley
Hollow metal, aluminum and high-traffic doors kept working for businesses and property managers.
- Storefront Door Repair Valley
Aluminum storefront entrances repaired: pivots, closers, locks, glass and alignment.
- Automatic Door Repair Valley
Automatic sliding and swing doors, operators, sensors and safety systems serviced.
- Screen Door Repair Valley
Sliding screens, storm doors and screen panels rescreened, rerolled and rehung.
- French Door Repair Valley
Sagging, dragging and drafty French doors realigned, resealed and rehung.
- Interior Door Repair Valley
Sticking, sagging, rattling and damaged interior doors made to work properly again.
- Exterior Door Repair Valley
Front and back entry doors resealed, realigned, reinforced and repaired.
- Window Repair Valley
Sashes, balances, glass, seals and hardware repaired on residential and commercial windows.
Door Closer Repair near Valley
We cover the surrounding Chambers County and east central Alabama communities as well:
- Door Closer Repair in Lanett
- Door Closer Repair in LaFayette
- Door Closer Repair in Huguley
- Door Closer Repair in Roanoke
- Door Closer Repair in Alexander City
- Door Closer Repair in Dadeville
- Door Closer Repair in Camp Hill
- Door Closer Repair in Goodwater
All door repair services in Valley · Door Closer Repair across Alabama · All Alabama service areas
Broken, stuck, or will not lock?Talk to someone who works on these every day.
Click to Call (205) 619-2895