If you are anywhere between Downtown Aliceville and the US-17 corridor, or out toward Aliceville Lake on the Tenn-Tom Waterway, we cover it, along with the rest of Pickens County.
Between the established parts of Aliceville and the newer subdivisions, we see two different kinds of failure: worn-out frames on one side of town and worn-out hardware on the other.
Need it looked at soon?Call and we will tell you honestly when we can get there.
Click to Call (205) 619-2895When to call about sliding door repair
These are the sliding door repair faults we are called out to most often in Aliceville. If you recognise one, the underlying cause is usually the second half of the line.
- It slides fine one way and binds the otherOne roller of the tandem pair has collapsed, so the panel is running out of level.
- The screen door falls out constantlyWorn screen rollers and a bent top or bottom rail on the screen frame.
- The door takes both hands to moveAlmost always flat-spotted or seized rollers, sometimes a track that has worn into a trough.
- Daylight at the top or bottom cornerThe panel is out of plumb, usually from uneven roller adjustment or a frame that has moved.
- Condensation between the glass panesFailed insulated glass seal in the panel; the glass unit itself needs replacement.
- The door stops short of the jamb by half an inchDebris packed at the end of the track, or an adjuster screw wound fully out.
One call gets you an answer.We will tell you what is wrong and what it takes to fix.
Click to Call (205) 619-2895What Aliceville weather does to sliding door repair
West Alabama collects a lot of rain, and it comes in hard bursts. Doors here fail at the bottom first, where water sits against the sweep and the end grain.
Storm wind pushes hard on the large flat surface of a patio slider and drives the panel against the interlock, which loosens roller adjustment over time and works the panel out of alignment with its latch keeper.
Long humid stretches keep condensation on the cold aluminum frame of a slider almost continuously, and that moisture rusts roller axles and adjustment screws from the inside, which is why the screws often shear when someone finally tries to adjust the door.
We see the pattern often enough across Pickens County that we usually know what we are looking at before we arrive.
Local factors we account for in Aliceville: storm wind and sustained humidity — typical of west Alabama.
Not sure whether it is a repair or a replacement?Describe the symptoms and we will give you a straight answer.
Click to Call (205) 619-2895What we repair
- Weep hole clearingOpening blocked sill drainage so the track sheds water instead of holding it.
- Frame squaringShimming and refastening frames that have shifted out of square.
- Track repair and cappingStainless track caps installed over worn aluminum so the new rollers ride on a fresh surface.
- Panel realignmentRe-plumbing and adjusting the panel so it latches and seals across the full height.
- Multi-panel and pocket door serviceAlignment and hardware work on stacking and pocketing patio systems.
- Weatherstrip and pile seal replacementNew fin seal and bulb weatherstrip to close the gaps that let air and water in.
- Screen door rebuildNew screen rollers, spline, mesh and corner keys.
Tell us what the door is doing and we will tell you what it needs.No guesswork over the phone, no pressure.
Click to Call (205) 619-2895Our sliding door repair process
- Start with the openingBefore the panel comes out we check the header for deflection and the sill for level, because a door cannot run true in an opening that is not.
- Get the glass out of the way safelyA patio panel is heavy and awkward. We take it out properly so the track and the roller housings can actually be seen.
- Match rollers to the door, not the cataloguePanel weight, housing type and track profile all decide the roller. Fitting whatever is on the van is why doors come back.
- Bring the running surface backA pitted or peened track will destroy new rollers in a season, so it gets dressed, capped or replaced before anything goes back in.
- Level the panel, then set the heightBoth adjusters are wound together so the panel sits level and the interlock engages along its whole length, not just at the top. Jobs out this way get their fixings checked into framing rather than casing, which is what stops the sag coming back.
- Hand it back working the way you use itWe open and close it the way you would, one-handed, and check the lock, the screen and the drainage before we leave.
Not sure whether it is a repair or a replacement?Describe the symptoms and we will give you a straight answer.
Click to Call (205) 619-2895What affects the cost of sliding door repair in Aliceville
Pricing on sliding door repair depends on what has actually failed, which is why we talk it through before quoting. These are the things that move the number:
- the age of the door and whether replacement hardware is still made for it
- whether the fix is rollers only or rollers plus track repair
- how many panels the system has, since three and four panel doors take longer to set
- how much damage the worn track has taken before the call
- whether the frame has moved and needs shimming or refastening
Call and describe what the door is doing. In most cases we can tell you over the phone which of those applies to you before anyone drives out to Aliceville.
One call gets you an answer.We will tell you what is wrong and what it takes to fix.
Click to Call (205) 619-2895Areas we cover for sliding door repair in Aliceville
If you are in Downtown Aliceville and the US-17 corridor, or anywhere near Aliceville Lake on the Tenn-Tom Waterway and the Aliceville Museum, we cover you.
We also cover the nearby Pickens County and west Alabama communities listed further down this page.
Broken, stuck, or will not lock?Talk to someone who works on these every day.
Click to Call (205) 619-2895Sliding door repair in Aliceville: questions we get asked
Do you repair the older aluminum sliding doors?
Yes, and there are a lot of them in Aliceville. Aluminum frames from the sixties through the eighties are actually good candidates for repair because the frame material has not degraded; it is the rollers, the track surface and the weatherstrip that have worn out.
Will new rollers fix a door that scrapes loudly?
Only if the track is still in good condition. Once a roller has broken through and the housing has been riding on bare aluminum, the track has a groove worn in it, and new rollers dropped onto that groove will fail quickly. That is when we cap the track.
Is there anything I can do to make my sliding door last longer?
Vacuum the track rather than sweeping it, keep silicone rather than oil-based lubricant on the running surface, and check that the weep holes at the bottom of the sill are open. Oil-based products in Aliceville collect dust and grit and turn into grinding paste.
Why does my sliding door work fine in winter and stick in summer?
That is a moisture and expansion problem, and it is common across Pickens County. Humid months swell wood and vinyl components and expand the frame slightly, which is enough to close up clearance that was already marginal because of worn rollers.
My door came off the track. Did I break something?
Usually not. A panel comes out of the track when it has dropped low enough that the head channel no longer holds it, which means the rollers were already worn or the adjustment screws backed out. Putting it back without correcting the height means it will happen again.
What does it mean when there is water pooling in the track?
The weep holes that drain the sill are blocked. It is one of the most common causes of water on the floor inside, and it is also one of the easiest things to fix, but if it sits long enough it rusts the roller assemblies out.
One call gets you an answer.We will tell you what is wrong and what it takes to fix.
Click to Call (205) 619-2895Other door repair services in Aliceville
- Door Lock Repair Aliceville
Deadbolts, latches, cylinders and strike alignment repaired on residential and commercial doors.
- Door Frame Repair Aliceville
Rotted, split, kicked-in and out-of-square frames rebuilt so the door fits again.
- Door Handle Repair Aliceville
Loose, broken and seized handles, knobs and levers repaired or replaced.
- Door Hinge Repair Aliceville
Sagging doors, stripped hinge screws, squealing pins and worn knuckles put right.
- Patio Door Repair Aliceville
Sliding, French and multi-panel patio doors repaired, realigned and resealed.
- Door Glass Repair Aliceville
Broken, cracked and fogged door glass replaced, including tempered and insulated units.
- Commercial Door Repair Aliceville
Hollow metal, aluminum and high-traffic doors kept working for businesses and property managers.
- Storefront Door Repair Aliceville
Aluminum storefront entrances repaired: pivots, closers, locks, glass and alignment.
- Door Closer Repair Aliceville
Closers adjusted, rebuilt and replaced so doors shut properly instead of slamming or hanging open.
- Automatic Door Repair Aliceville
Automatic sliding and swing doors, operators, sensors and safety systems serviced.
- Screen Door Repair Aliceville
Sliding screens, storm doors and screen panels rescreened, rerolled and rehung.
- French Door Repair Aliceville
Sagging, dragging and drafty French doors realigned, resealed and rehung.
- Interior Door Repair Aliceville
Sticking, sagging, rattling and damaged interior doors made to work properly again.
- Exterior Door Repair Aliceville
Front and back entry doors resealed, realigned, reinforced and repaired.
- Window Repair Aliceville
Sashes, balances, glass, seals and hardware repaired on residential and commercial windows.
Sliding Door Repair near Aliceville
We cover the surrounding Pickens County and west Alabama communities as well:
- Sliding Door Repair in Carrollton
- Sliding Door Repair in Reform
- Sliding Door Repair in Gordo
- Sliding Door Repair in Northport
- Sliding Door Repair in Cottondale
- Sliding Door Repair in Holt
- Sliding Door Repair in Coker
- Sliding Door Repair in Coaling
All door repair services in Aliceville · Sliding Door Repair across Alabama · All Alabama service areas
Need it looked at soon?Call and we will tell you honestly when we can get there.
Click to Call (205) 619-2895