Alabama Sliding Door Repair Statewide door & window repair Click to Call (205) 619-2895
Home Alabama Brewton Screen Door Repair

Brewton, Alabama · Escambia County

Screen Door Repair in Brewton, AL

We repair sliding patio screens, hinged screen doors, storm doors and screen enclosures, and we rescreen with mesh chosen for what the door actually has to put up with: pets, sun, or fine insects.

  • Repair first, replace last
  • Homes & businesses
  • Escambia County covered
  • Straight answers on the phone

Click to Call (205) 619-2895

Screen Door Repair diagram
Screen Door Repair — Brewton, Alabama

Our Brewton customers are spread from Downtown Brewton to the Belleville Avenue corridor and out around the Escambia County Courthouse, and we serve the surrounding Escambia County communities on the same schedule.

Between the established parts of Brewton and the newer subdivisions, we see two different kinds of failure: worn-out frames on one side of town and worn-out hardware on the other.

Tell us what the door is doing and we will tell you what it needs.No guesswork over the phone, no pressure.

Click to Call (205) 619-2895

When to call about screen door repair

These are the screen door repair faults we are called out to most often in Brewton. If you recognise one, the underlying cause is usually the second half of the line.

  • The screen door falls out of the trackWorn screen rollers or a bent top rail that no longer holds the panel in the head channel.
  • Mesh sagging and billowingLoose or dried-out spline that is no longer holding the mesh tight.
  • The latch does not line upThe door has sagged or the frame has moved.
  • The spline has lifted out of the channel at a cornerShrunken or hardened spline, usually after several summers of UV exposure.
  • Pets have pushed through the bottomA rescreen with pet-resistant mesh and often a pet grille.
  • It takes real effort to slideSeized rollers or a track full of packed debris.

Most doors we see are repairable.Call and find out before you price a replacement.

Click to Call (205) 619-2895

What we see on screen door repair around Escambia County

Blowing sand gets into everything down here. Tracks, screen channels, thresholds and lock cylinders all collect it, and it acts like sandpaper on moving parts.

Humidity corrodes the steel components in screen rollers and rusts the tiny springs in adjusters, so screens seize up and drop out of their track.

Blowing sand abrades screen mesh and packs into the screen track, and a screen track full of sand will not let a panel roll no matter how good the rollers are.

We see the pattern often enough across Escambia County that we usually know what we are looking at before we arrive.

Local factors we account for in Brewton: sustained humidity and blowing sand — typical of the Alabama Gulf Coast.

Need it looked at soon?Call and we will tell you honestly when we can get there.

Click to Call (205) 619-2895

What we repair

  • Screen track repairRepairing or replacing the channel the screen rides in.
  • RescreeningNew mesh and spline in standard fiberglass, pet-resistant, solar or fine no-see-um mesh.
  • Wind chain and closer installationProtecting storm doors from wind damage.
  • Hinged screen door repairHinges, latches, closers and screen panels on swinging screen doors.
  • Screen enclosure and porch panel repairRescreening porch and patio enclosure panels.
  • Frame repair and squaringStraightening bent frames and replacing corner keys.
  • Sliding screen replacementCustom-built replacement screen panels where the original is beyond repair.

Get a real diagnosis, not a sales pitch.We fix doors for a living.

Click to Call (205) 619-2895

How a Brewton screen door repair visit works

  1. Work out whether it is the screen or the trackA screen that jams is often a track problem. Replacing rollers in a damaged track fixes nothing.
  2. Check the frame for squareA racked frame will never slide properly. Corner keys get reset before anything else is considered.
  3. Choose mesh for the jobStandard, pet-resistant, solar or fine insect mesh. The right one depends on the door, the exposure and what tore the last one.
  4. Rescreen with correct tensionEven tension and properly seated spline so the mesh does not sag or pull out of the channel. On the coast we also check every fastener on the opening, because salt finds plated screws long before it touches the door itself.
  5. Fit and adjust the rollersBoth rollers set so the frame runs level and the latch meets its keeper without lifting.
  6. Test the full travelEnd to end, several times, with the latch engaging cleanly at the close.

Broken, stuck, or will not lock?Talk to someone who works on these every day.

Click to Call (205) 619-2895

What affects the cost of screen door repair in Brewton

We would rather tell you what drives the price than quote a number that turns out to be wrong once we see the door. On a screen door repair job in Brewton, the main variables are these:

  • storm door hardware such as closers and latches
  • custom-built replacement panels where the original is not repairable
  • the mesh type chosen, from standard fiberglass to pet-resistant and solar
  • roller and track work in addition to the screen itself
  • rescreening versus repairing or replacing the frame

Call and describe what the door is doing. In most cases we can tell you over the phone which of those applies to you before anyone drives out to Brewton.

Not sure whether it is a repair or a replacement?Describe the symptoms and we will give you a straight answer.

Click to Call (205) 619-2895

Areas we cover for screen door repair in Brewton

We work throughout Brewton, including Downtown Brewton, the Belleville Avenue corridor and the US-31 corridor. If you are near the Escambia County Courthouse, Burnt Corn Creek and the Brewton mill district, that is inside our normal service area.

Service area: Brewton, Escambia County, Alabama — and the surrounding communities.

We also cover the nearby Escambia County and the Alabama Gulf Coast communities listed further down this page.

Tell us what the door is doing and we will tell you what it needs.No guesswork over the phone, no pressure.

Click to Call (205) 619-2895

Screen door repair in Brewton: questions we get asked

My sliding screen keeps falling out. Why does it keep happening?

The rollers have worn down so the panel is riding too low and the top rail no longer sits in the head channel. Lifting it back in without replacing the rollers means it will come out again, usually within days.

Can a bent screen frame be straightened?

Sometimes. Light aluminum frames can often be brought back to square, but a badly racked frame is usually better replaced, and a custom panel is not expensive.

Do you make custom-size screens?

Yes. Older openings in Brewton are rarely a stock size, and building a panel to the actual measured opening is the only way to get one that fits and stays in.

Is it worth rescreening or should I just buy a new screen door?

Rescreening is far cheaper and the frame is usually fine. New panels only make sense when the frame is bent beyond straightening or the corners are gone.

Can you make a screen that keeps out the tiny biting insects?

Yes, fine no-see-um mesh. It has a much tighter weave, and in the parts of Escambia County near water it is the only thing that actually works against the smallest biters.

The screen slides hard even though it is not falling out. What is wrong?

Either the rollers have seized or the track is packed with debris. In Brewton the track collects a surprising amount of grit, and it acts like grinding paste on the rollers.

Need it looked at soon?Call and we will tell you honestly when we can get there.

Click to Call (205) 619-2895

Other door repair services in Brewton


Screen Door Repair near Brewton

We cover the surrounding Escambia County and the Alabama Gulf Coast communities as well:

All door repair services in Brewton  ·  Screen Door Repair across Alabama  ·  All Alabama service areas

Tell us what the door is doing and we will tell you what it needs.No guesswork over the phone, no pressure.

Click to Call (205) 619-2895
Click to Call (205) 619-2895Tap to speak to a door repair tech now