Morris sits in Jefferson County, and our work here runs from the US-31 corridor out past the I-65 interchange, with Bessemer and Homewood close enough that we are usually in the area anyway.
A lot of what we see in Jefferson County comes down to age. Houses built decades ago have solid frames with tired hardware; houses built recently have sound hardware in frames that are still settling.
Need it looked at soon?Call and we will tell you honestly when we can get there.
Click to Call (205) 619-2895What Morris customers call us about
These are the storefront door repair faults we are called out to most often in Morris. If you recognise one, the underlying cause is usually the second half of the line.
- The door will not close the last few inchesCloser latch speed misadjusted or a failed closer spring.
- The deadlatch will not catch anymoreDoor alignment has drifted so the latch no longer meets the keeper.
- The door drags at the top cornerThe bottom pivot has worn and the door has dropped.
- A gap along the meeting stile on a pair of doorsDoors out of alignment or worn weatherstrip between them.
- The bottom rail has dropped and the corner is out of squareFailed corner fasteners in the rail, which is the most common storefront failure by a distance.
- Water blowing under the door during stormsFailed sweep and threshold seal.
Tell us what the door is doing and we will tell you what it needs.No guesswork over the phone, no pressure.
Click to Call (205) 619-2895What Morris weather does to storefront door repair
Two storm seasons a year, spring and late fall, push water and debris against exterior doors across the metro.
Humidity and condensation work on the steel components inside aluminum entrance hardware, and the deadlatch and cylinder are the first things to stiffen up.
Building movement racks an aluminum storefront frame, and because these doors are set to fine tolerances, even small movement stops the deadlatch reaching its keeper cleanly.
None of it is a reason to replace a door. It is a reason to use the right parts and set the door up correctly in the first place.
Local factors we account for in Morris: sustained humidity and soil movement — typical of the Birmingham metro.
Need it looked at soon?Call and we will tell you honestly when we can get there.
Click to Call (205) 619-2895Our storefront door repair services in Morris
- Deadlatch and lock serviceAdams Rite style deadlatches, mortise cylinders, hook bolts and keepers.
- Emergency board-up and securingSame-day securing so a business can lock up.
- Closer repair and replacementConcealed overhead, surface and floor closers repaired or replaced and correctly adjusted.
- Storefront glass replacementTempered glass replacement for doors, sidelites and transoms.
- Bottom rail repairRe-securing or replacing bottom rails and resetting the glass properly.
- Door alignment and squaringBringing a dropped or racked storefront door back to correct alignment.
- Pivot and hinge replacementTop and bottom pivots, offset pivots and continuous hinges on aluminum entrances.
One call gets you an answer.We will tell you what is wrong and what it takes to fix.
Click to Call (205) 619-2895How a Morris storefront door repair visit works
- Look at the pivot firstOn a sagging storefront door the bottom pivot is the usual culprit, and everything else you might blame is a symptom of it.
- Test the closer on its ownDisconnecting the arm tells us instantly whether the door is heavy or the closer is failing. They need different work.
- Secure before you finishDeadlatch function comes first, because a shop that cannot lock its front door cannot close.
- Rebuild the rail properlyWhere the bottom rail has separated, it is reassembled with the glass correctly blocked rather than packed and hoped for. We flush the running surfaces properly on metro jobs rather than just wiping them, since fine clay packs into places a cloth will not reach.
- Set the closer to codeOpening force and closing speed adjusted for accessibility and for the actual traffic through the door.
- Work to your scheduleWe plan around trading hours so the entrance is not out of service during business.
Not sure whether it is a repair or a replacement?Describe the symptoms and we will give you a straight answer.
Click to Call (205) 619-2895What affects the cost of storefront door repair in Morris
Every storefront door repair call in Jefferson County is a little different, and the cost follows what the door actually needs:
- whether the pivots, closer, or both need replacing
- concealed and floor closers versus surface mounted units
- hardware grade and ADA compliance requirements
- frame damage from forced entry
- after-hours or emergency scheduling
Call and describe what the door is doing. In most cases we can tell you over the phone which of those applies to you before anyone drives out to Morris.
Tell us what the door is doing and we will tell you what it needs.No guesswork over the phone, no pressure.
Click to Call (205) 619-2895Areas we cover for storefront door repair in Morris
If you are in the US-31 corridor and Cliff Road, or anywhere near the I-65 interchange and Black Creek, we cover you.
We also cover the nearby Jefferson County and the Birmingham metro communities listed further down this page.
Need it looked at soon?Call and we will tell you honestly when we can get there.
Click to Call (205) 619-2895Storefront door repair in Morris: questions we get asked
Do you work on pairs of doors and automatic entrances?
Yes, both. Pairs need coordinated alignment so the astragal seals and both leaves latch, and we service automatic operators as well.
The bottom rail of our door is coming loose. Is that serious?
Yes. The bottom rail holds the glass. Once its connection loosens, the glass is no longer properly supported and the door is on borrowed time.
Can you add a panic bar to our storefront door?
Yes, and depending on the occupancy of your Morris building it may be required. Exit devices can be fitted to most aluminum storefront doors.
Our front door will not lock at night. Can you come today?
That is exactly the call to make immediately. A Morris business that cannot secure its front entrance has a real problem, and getting the deadlatch working again is usually straightforward once we see it.
Why is our door so hard for customers to open?
Usually the closer has been cranked up to force a misaligned door to latch. That is treating the symptom. Fix the alignment and the closer can go back to a comfortable setting that still latches.
How often should storefront doors be serviced?
For a busy Morris entrance, once or twice a year. Pivots and closers wear gradually, and adjusting them before they fail is far cheaper than an emergency call when the door will not latch.
Broken, stuck, or will not lock?Talk to someone who works on these every day.
Click to Call (205) 619-2895Other door repair services in Morris
- Sliding Door Repair Morris
Sticking, jumping, or dragging sliding glass doors put back on smooth-rolling track.
- Door Lock Repair Morris
Deadbolts, latches, cylinders and strike alignment repaired on residential and commercial doors.
- Door Frame Repair Morris
Rotted, split, kicked-in and out-of-square frames rebuilt so the door fits again.
- Door Handle Repair Morris
Loose, broken and seized handles, knobs and levers repaired or replaced.
- Door Hinge Repair Morris
Sagging doors, stripped hinge screws, squealing pins and worn knuckles put right.
- Patio Door Repair Morris
Sliding, French and multi-panel patio doors repaired, realigned and resealed.
- Door Glass Repair Morris
Broken, cracked and fogged door glass replaced, including tempered and insulated units.
- Commercial Door Repair Morris
Hollow metal, aluminum and high-traffic doors kept working for businesses and property managers.
- Door Closer Repair Morris
Closers adjusted, rebuilt and replaced so doors shut properly instead of slamming or hanging open.
- Automatic Door Repair Morris
Automatic sliding and swing doors, operators, sensors and safety systems serviced.
- Screen Door Repair Morris
Sliding screens, storm doors and screen panels rescreened, rerolled and rehung.
- French Door Repair Morris
Sagging, dragging and drafty French doors realigned, resealed and rehung.
- Interior Door Repair Morris
Sticking, sagging, rattling and damaged interior doors made to work properly again.
- Exterior Door Repair Morris
Front and back entry doors resealed, realigned, reinforced and repaired.
- Window Repair Morris
Sashes, balances, glass, seals and hardware repaired on residential and commercial windows.
Storefront Door Repair near Morris
We cover the surrounding Jefferson County and the Birmingham metro communities as well:
- Storefront Door Repair in Bessemer
- Storefront Door Repair in Homewood
- Storefront Door Repair in Vestavia Hills
- Storefront Door Repair in Mountain Brook
- Storefront Door Repair in Hueytown
- Storefront Door Repair in Center Point
- Storefront Door Repair in Gardendale
- Storefront Door Repair in Irondale
All door repair services in Morris · Storefront Door Repair across Alabama · All Alabama service areas
Broken, stuck, or will not lock?Talk to someone who works on these every day.
Click to Call (205) 619-2895