We know Samson well: the older housing around Main Street, the newer construction toward the AL-52 corridor, and everything out past the Samson city park.
A lot of what we see in Geneva County comes down to age. Houses built decades ago have solid frames with tired hardware; houses built recently have sound hardware in frames that are still settling.
Not sure whether it is a repair or a replacement?Describe the symptoms and we will give you a straight answer.
Click to Call (205) 619-2895What Samson customers call us about
These are the sliding door repair faults we are called out to most often in Samson. If you recognise one, the underlying cause is usually the second half of the line.
- The screen door falls out constantlyWorn screen rollers and a bent top or bottom rail on the screen frame.
- Water on the floor after heavy rainBlocked weep holes in the sill, so the track fills and backs up over the interior lip.
- The door will not latch anymoreThe panel has settled out of square, so the hook or mortise latch no longer lines up with the keeper.
- You can lift the panel visibly in its openingExcess head clearance from a sagging header, which is what lets it jump the track.
- It jumps off the trackThe panel has dropped low enough that it is no longer captured by the head channel, or the roller adjustment screws have backed out.
- A loud grinding or scraping noiseMetal-on-metal contact where the roller housing has broken through and is riding on the bare track.
Broken, stuck, or will not lock?Talk to someone who works on these every day.
Click to Call (205) 619-2895What we see on sliding door repair around Geneva County
Sandy soil here drains fast but also shifts, and blowing sand is a constant presence in sliding door tracks and screen channels.
Sliding door sills are designed to collect water and drain it back outside through weep holes, and after a heavy rain those weeps are exactly where debris ends up, so the track fills, the water backs over the interior lip, and the roller assemblies sit in standing water.
Storm wind pushes hard on the large flat surface of a patio slider and drives the panel against the interlock, which loosens roller adjustment over time and works the panel out of alignment with its latch keeper.
None of it is a reason to replace a door. It is a reason to use the right parts and set the door up correctly in the first place.
Local factors we account for in Samson: heavy rainfall and storm wind — typical of the Wiregrass.
Get a real diagnosis, not a sales pitch.We fix doors for a living.
Click to Call (205) 619-2895Sliding door repair work we handle in Samson
- Anti-lift and security hardwareTrack locks, foot bolts and anti-lift blocks fitted to the panel.
- Panel realignmentRe-plumbing and adjusting the panel so it latches and seals across the full height.
- Frame squaringShimming and refastening frames that have shifted out of square.
- Weep hole clearingOpening blocked sill drainage so the track sheds water instead of holding it.
- Latch and keeper repairRebuilding or replacing mortise latches, hook latches and strike keepers.
- Multi-panel and pocket door serviceAlignment and hardware work on stacking and pocketing patio systems.
- Glass unit replacementTempered insulated glass replacement for fogged or broken panels.
Most doors we see are repairable.Call and find out before you price a replacement.
Click to Call (205) 619-2895How we approach sliding door repair
- Look at the whole opening, not just the doorWe check the panel, the track, the head channel and the frame for square before touching a screwdriver, because a door that is fighting the frame will eat a new set of rollers in a year.
- Get the glass out of the way safelyA patio panel is heavy and awkward. We take it out properly so the track and the roller housings can actually be seen.
- Match rollers to the door, not the cataloguePanel weight, housing type and track profile all decide the roller. Fitting whatever is on the van is why doors come back.
- Bring the running surface backA pitted or peened track will destroy new rollers in a season, so it gets dressed, capped or replaced before anything goes back in. Sandy-soil jobs get their running surfaces cleaned out thoroughly, because new rollers fitted into a gritty track will not last a year.
- Level the panel, then set the heightBoth adjusters are wound together so the panel sits level and the interlock engages along its whole length, not just at the top.
- Hand it back working the way you use itWe open and close it the way you would, one-handed, and check the lock, the screen and the drainage before we leave.
Need it looked at soon?Call and we will tell you honestly when we can get there.
Click to Call (205) 619-2895What affects the cost of sliding door repair in Samson
Pricing on sliding door repair depends on what has actually failed, which is why we talk it through before quoting. These are the things that move the number:
- the size and weight of the panel, since heavy insulated glass units need heavier assemblies
- the age of the door and whether replacement hardware is still made for it
- whether the frame has moved and needs shimming or refastening
- how much damage the worn track has taken before the call
- whether the fix is rollers only or rollers plus track repair
Call and describe what the door is doing. In most cases we can tell you over the phone which of those applies to you before anyone drives out to Samson.
Broken, stuck, or will not lock?Talk to someone who works on these every day.
Click to Call (205) 619-2895Areas we cover for sliding door repair in Samson
We work throughout Samson, including Main Street and the AL-52 corridor. If you are near the Samson city park and the Pea River, that is inside our normal service area.
We also cover the nearby Geneva County and the Wiregrass communities listed further down this page.
Need it looked at soon?Call and we will tell you honestly when we can get there.
Click to Call (205) 619-2895Sliding door repair in Samson: questions we get asked
Will new rollers fix a door that scrapes loudly?
Only if the track is still in good condition. Once a roller has broken through and the housing has been riding on bare aluminum, the track has a groove worn in it, and new rollers dropped onto that groove will fail quickly. That is when we cap the track.
Do you repair the older aluminum sliding doors?
Yes, and there are a lot of them in Samson. Aluminum frames from the sixties through the eighties are actually good candidates for repair because the frame material has not degraded; it is the rollers, the track surface and the weatherstrip that have worn out.
Can a sliding door that has stopped rolling be fixed, or does it need replacing?
Almost always fixed. The frame and glass are usually fine and it is the two small roller assemblies underneath that have failed. Replacing a whole patio door in Samson is a several thousand dollar job; rebuilding the rollers and track is a fraction of that and gets you a door that rolls better than it has in years.
How long does a sliding door repair take?
Most single roller-and-track jobs in Samson take one to two hours. Multi-panel doors, doors with damaged tracks that need capping, or units that also need glass work take longer, and we tell you which category yours falls into before we start.
Do you replace the glass in sliding doors too?
Yes. Fogged units where the insulated seal has failed, cracked panes and full tempered glass replacement are all part of what we do, and we can usually keep the existing frame.
Is there anything I can do to make my sliding door last longer?
Vacuum the track rather than sweeping it, keep silicone rather than oil-based lubricant on the running surface, and check that the weep holes at the bottom of the sill are open. Oil-based products in Samson collect dust and grit and turn into grinding paste.
Need it looked at soon?Call and we will tell you honestly when we can get there.
Click to Call (205) 619-2895Other door repair services in Samson
- Door Lock Repair Samson
Deadbolts, latches, cylinders and strike alignment repaired on residential and commercial doors.
- Door Frame Repair Samson
Rotted, split, kicked-in and out-of-square frames rebuilt so the door fits again.
- Door Handle Repair Samson
Loose, broken and seized handles, knobs and levers repaired or replaced.
- Door Hinge Repair Samson
Sagging doors, stripped hinge screws, squealing pins and worn knuckles put right.
- Patio Door Repair Samson
Sliding, French and multi-panel patio doors repaired, realigned and resealed.
- Door Glass Repair Samson
Broken, cracked and fogged door glass replaced, including tempered and insulated units.
- Commercial Door Repair Samson
Hollow metal, aluminum and high-traffic doors kept working for businesses and property managers.
- Storefront Door Repair Samson
Aluminum storefront entrances repaired: pivots, closers, locks, glass and alignment.
- Door Closer Repair Samson
Closers adjusted, rebuilt and replaced so doors shut properly instead of slamming or hanging open.
- Automatic Door Repair Samson
Automatic sliding and swing doors, operators, sensors and safety systems serviced.
- Screen Door Repair Samson
Sliding screens, storm doors and screen panels rescreened, rerolled and rehung.
- French Door Repair Samson
Sagging, dragging and drafty French doors realigned, resealed and rehung.
- Interior Door Repair Samson
Sticking, sagging, rattling and damaged interior doors made to work properly again.
- Exterior Door Repair Samson
Front and back entry doors resealed, realigned, reinforced and repaired.
- Window Repair Samson
Sashes, balances, glass, seals and hardware repaired on residential and commercial windows.
Sliding Door Repair near Samson
We cover the surrounding Geneva County and the Wiregrass communities as well:
- Sliding Door Repair in Geneva
- Sliding Door Repair in Hartford
- Sliding Door Repair in Slocomb
- Sliding Door Repair in Malvern
- Sliding Door Repair in Greenville
- Sliding Door Repair in Georgiana
- Sliding Door Repair in Luverne
- Sliding Door Repair in Evergreen
All door repair services in Samson · Sliding Door Repair across Alabama · All Alabama service areas
Most doors we see are repairable.Call and find out before you price a replacement.
Click to Call (205) 619-2895