Between Roanoke proper, the Downtown Roanoke area and the newer building out toward Main Street, we stay busy in Randolph County, and Valley is close enough that we are often nearby.
A lot of what we see in Randolph County comes down to age. Houses built decades ago have solid frames with tired hardware; houses built recently have sound hardware in frames that are still settling.
Not sure whether it is a repair or a replacement?Describe the symptoms and we will give you a straight answer.
Click to Call (205) 619-2895What Roanoke customers call us about
These are the sliding door repair faults we are called out to most often in Roanoke. If you recognise one, the underlying cause is usually the second half of the line.
- The door takes both hands to moveAlmost always flat-spotted or seized rollers, sometimes a track that has worn into a trough.
- Condensation between the glass panesFailed insulated glass seal in the panel; the glass unit itself needs replacement.
- It jumps off the trackThe panel has dropped low enough that it is no longer captured by the head channel, or the roller adjustment screws have backed out.
- Track full of packed grit that will not vacuum outDebris compacted under the rollers, which accelerates wear on both parts.
- The handle pulls but nothing releasesBroken latch linkage inside the stile, or a snapped internal actuator rod.
- Water on the floor after heavy rainBlocked weep holes in the sill, so the track fills and backs up over the interior lip.
Get a real diagnosis, not a sales pitch.We fix doors for a living.
Click to Call (205) 619-2895What Roanoke weather does to sliding door repair
Spring storm lines come through fast here and put a lot of wind pressure on doors before the rain even starts.
Storm wind pushes hard on the large flat surface of a patio slider and drives the panel against the interlock, which loosens roller adjustment over time and works the panel out of alignment with its latch keeper.
Dust and grit settle into the bottom track constantly and get packed under the rollers, and once that layer is compacted a vacuum will not lift it and the wheels are riding on abrasive rather than on aluminum.
None of it is a reason to replace a door. It is a reason to use the right parts and set the door up correctly in the first place.
Local factors we account for in Roanoke: storm wind and grit and dust — typical of east central Alabama.
Need it looked at soon?Call and we will tell you honestly when we can get there.
Click to Call (205) 619-2895Sliding door repair work we handle in Roanoke
- Track repair and cappingStainless track caps installed over worn aluminum so the new rollers ride on a fresh surface.
- Anti-lift and security hardwareTrack locks, foot bolts and anti-lift blocks fitted to the panel.
- Latch and keeper repairRebuilding or replacing mortise latches, hook latches and strike keepers.
- Handle set replacementInterior and exterior pulls, including keyed exterior handle sets.
- Glass unit replacementTempered insulated glass replacement for fogged or broken panels.
- Weatherstrip and pile seal replacementNew fin seal and bulb weatherstrip to close the gaps that let air and water in.
- Weep hole clearingOpening blocked sill drainage so the track sheds water instead of holding it.
Broken, stuck, or will not lock?Talk to someone who works on these every day.
Click to Call (205) 619-2895Our sliding door repair process
- Watch it move before touching anythingWe run the door end to end and listen. Where the noise starts and where the effort peaks tells us which roller has gone.
- Lift the panel out and inspect itThe wheels come off the housings and get checked for flat spots, seized bearings and housings that have been running on bare metal. Jobs in this part of the state get their weatherstrip assessed for heat and cold, since both extremes show up here.
- Match the hardwareSliding door rollers are not universal. We identify the manufacturer and panel weight and fit the right tandem assembly rather than the closest thing on the truck.
- Bring the running surface backA pitted or peened track will destroy new rollers in a season, so it gets dressed, capped or replaced before anything goes back in.
- Level the panel, then set the heightBoth adjusters are wound together so the panel sits level and the interlock engages along its whole length, not just at the top.
- Hand it back working the way you use itWe open and close it the way you would, one-handed, and check the lock, the screen and the drainage before we leave.
Not sure whether it is a repair or a replacement?Describe the symptoms and we will give you a straight answer.
Click to Call (205) 619-2895What affects the cost of sliding door repair in Roanoke
Every sliding door repair call in Randolph County is a little different, and the cost follows what the door actually needs:
- whether the fix is rollers only or rollers plus track repair
- how much damage the worn track has taken before the call
- the size and weight of the panel, since heavy insulated glass units need heavier assemblies
- how many panels the system has, since three and four panel doors take longer to set
- whether the frame has moved and needs shimming or refastening
Call and describe what the door is doing. In most cases we can tell you over the phone which of those applies to you before anyone drives out to Roanoke.
Not sure whether it is a repair or a replacement?Describe the symptoms and we will give you a straight answer.
Click to Call (205) 619-2895Areas we cover for sliding door repair in Roanoke
Our Roanoke service area includes Downtown Roanoke, Main Street and the US-431 corridor and the surrounding Randolph County communities, out around the Roanoke square, Lake Wedowee and the Handley school campus.
We also cover the nearby Randolph County and east central Alabama communities listed further down this page.
Broken, stuck, or will not lock?Talk to someone who works on these every day.
Click to Call (205) 619-2895Sliding door repair in Roanoke: questions we get asked
Will new rollers fix a door that scrapes loudly?
Only if the track is still in good condition. Once a roller has broken through and the housing has been riding on bare aluminum, the track has a groove worn in it, and new rollers dropped onto that groove will fail quickly. That is when we cap the track.
Is there anything I can do to make my sliding door last longer?
Vacuum the track rather than sweeping it, keep silicone rather than oil-based lubricant on the running surface, and check that the weep holes at the bottom of the sill are open. Oil-based products in Roanoke collect dust and grit and turn into grinding paste.
How long does a sliding door repair take?
Most single roller-and-track jobs in Roanoke take one to two hours. Multi-panel doors, doors with damaged tracks that need capping, or units that also need glass work take longer, and we tell you which category yours falls into before we start.
My door came off the track. Did I break something?
Usually not. A panel comes out of the track when it has dropped low enough that the head channel no longer holds it, which means the rollers were already worn or the adjustment screws backed out. Putting it back without correcting the height means it will happen again.
What does it mean when there is water pooling in the track?
The weep holes that drain the sill are blocked. It is one of the most common causes of water on the floor inside, and it is also one of the easiest things to fix, but if it sits long enough it rusts the roller assemblies out.
Can you fix the lock without fixing the door?
Sometimes, but if the door has settled, a new lock will not line up with the keeper any better than the old one did. We check the panel alignment first, because a lock that will not catch is often a symptom rather than the actual problem.
One call gets you an answer.We will tell you what is wrong and what it takes to fix.
Click to Call (205) 619-2895Other door repair services in Roanoke
- Door Lock Repair Roanoke
Deadbolts, latches, cylinders and strike alignment repaired on residential and commercial doors.
- Door Frame Repair Roanoke
Rotted, split, kicked-in and out-of-square frames rebuilt so the door fits again.
- Door Handle Repair Roanoke
Loose, broken and seized handles, knobs and levers repaired or replaced.
- Door Hinge Repair Roanoke
Sagging doors, stripped hinge screws, squealing pins and worn knuckles put right.
- Patio Door Repair Roanoke
Sliding, French and multi-panel patio doors repaired, realigned and resealed.
- Door Glass Repair Roanoke
Broken, cracked and fogged door glass replaced, including tempered and insulated units.
- Commercial Door Repair Roanoke
Hollow metal, aluminum and high-traffic doors kept working for businesses and property managers.
- Storefront Door Repair Roanoke
Aluminum storefront entrances repaired: pivots, closers, locks, glass and alignment.
- Door Closer Repair Roanoke
Closers adjusted, rebuilt and replaced so doors shut properly instead of slamming or hanging open.
- Automatic Door Repair Roanoke
Automatic sliding and swing doors, operators, sensors and safety systems serviced.
- Screen Door Repair Roanoke
Sliding screens, storm doors and screen panels rescreened, rerolled and rehung.
- French Door Repair Roanoke
Sagging, dragging and drafty French doors realigned, resealed and rehung.
- Interior Door Repair Roanoke
Sticking, sagging, rattling and damaged interior doors made to work properly again.
- Exterior Door Repair Roanoke
Front and back entry doors resealed, realigned, reinforced and repaired.
- Window Repair Roanoke
Sashes, balances, glass, seals and hardware repaired on residential and commercial windows.
Sliding Door Repair near Roanoke
We cover the surrounding Randolph County and east central Alabama communities as well:
- Sliding Door Repair in Valley
- Sliding Door Repair in Lanett
- Sliding Door Repair in LaFayette
- Sliding Door Repair in Huguley
- Sliding Door Repair in Alexander City
- Sliding Door Repair in Dadeville
- Sliding Door Repair in Camp Hill
- Sliding Door Repair in Goodwater
All door repair services in Roanoke · Sliding Door Repair across Alabama · All Alabama service areas
One call gets you an answer.We will tell you what is wrong and what it takes to fix.
Click to Call (205) 619-2895