Alabama Sliding Door Repair Statewide door & window repair Click to Call (205) 619-2895
Home Alabama Saraland

Saraland, Alabama · Mobile County

Sliding Door Repair in Saraland, AL

Most sliding doors do not fail all at once. They get a little harder to move each season until somebody has to use two hands and a hip. By the time that happens the rollers are usually shot and the track has taken damage that...

  • Repair first, replace last
  • Homes & businesses
  • Mobile County covered
  • Straight answers on the phone

Click to Call (205) 619-2895

Sliding Door Repair diagram
Sliding Door Repair — Saraland, Alabama

If you are anywhere between the Industrial Parkway corridor and the Shelton Beach Road area, or out toward the Saraland civic complex, we cover it, along with the rest of Mobile County.

Door problems in Saraland tend to sort into two groups: older homes where the frames and jambs have taken decades of weather, and newer builds where the hardware was the cheapest part of the package and has already given up.

Need it looked at soon?Call and we will tell you honestly when we can get there.

Click to Call (205) 619-2895

The sliding door repair problems we see most in Saraland

These are the sliding door repair faults we are called out to most often in Saraland. If you recognise one, the underlying cause is usually the second half of the line.

  • The interlock at the meeting stile has separatedThe panel has dropped far enough that the stiles no longer engage each other.
  • Condensation between the glass panesFailed insulated glass seal in the panel; the glass unit itself needs replacement.
  • A loud grinding or scraping noiseMetal-on-metal contact where the roller housing has broken through and is riding on the bare track.
  • The screen door falls out constantlyWorn screen rollers and a bent top or bottom rail on the screen frame.
  • Cold air pouring in around the edgesCollapsed weatherstrip and worn pile seals, and often a gap the panel misalignment created.
  • It slides fine one way and binds the otherOne roller of the tandem pair has collapsed, so the panel is running out of level.

Tell us what the door is doing and we will tell you what it needs.No guesswork over the phone, no pressure.

Click to Call (205) 619-2895

What Saraland weather does to sliding door repair

Blowing sand gets into everything down here. Tracks, screen channels, thresholds and lock cylinders all collect it, and it acts like sandpaper on moving parts.

Sliding door sills are designed to collect water and drain it back outside through weep holes, and after a heavy rain those weeps are exactly where debris ends up, so the track fills, the water backs over the interior lip, and the roller assemblies sit in standing water.

Salt reaches the steel bearings inside sliding door rollers even on doors that never see spray, and a corroded bearing stops turning and starts skidding, which flattens the wheel and then grooves the track underneath it.

We see the pattern often enough across Mobile County that we usually know what we are looking at before we arrive.

Local factors we account for in Saraland: heavy rainfall and salt air — typical of the Alabama Gulf Coast.

One call gets you an answer.We will tell you what is wrong and what it takes to fix.

Click to Call (205) 619-2895

Sliding door repair work we handle in Saraland

  • Track repair and cappingStainless track caps installed over worn aluminum so the new rollers ride on a fresh surface.
  • Glass unit replacementTempered insulated glass replacement for fogged or broken panels.
  • Frame squaringShimming and refastening frames that have shifted out of square.
  • Weep hole clearingOpening blocked sill drainage so the track sheds water instead of holding it.
  • Handle set replacementInterior and exterior pulls, including keyed exterior handle sets.
  • Screen door rebuildNew screen rollers, spline, mesh and corner keys.
  • Weatherstrip and pile seal replacementNew fin seal and bulb weatherstrip to close the gaps that let air and water in.

Need it looked at soon?Call and we will tell you honestly when we can get there.

Click to Call (205) 619-2895

How a Saraland sliding door repair visit works

  1. Start with the openingBefore the panel comes out we check the header for deflection and the sill for level, because a door cannot run true in an opening that is not.
  2. Pull and inspect the panelThe panel comes out so we can see the roller housings, the bottom rail and the condition of the track underneath.
  3. Match the hardwareSliding door rollers are not universal. We identify the manufacturer and panel weight and fit the right tandem assembly rather than the closest thing on the truck. On the coast we also check every fastener on the opening, because salt finds plated screws long before it touches the door itself.
  4. Bring the running surface backA pitted or peened track will destroy new rollers in a season, so it gets dressed, capped or replaced before anything goes back in.
  5. Set it so the lock works without liftingThe height is right when the latch engages with the door simply pushed closed. Anything you have to lift is still misadjusted.
  6. Test it the way you use itWe run the door dozens of times, check the lock engagement, and make sure it moves with one hand.

Broken, stuck, or will not lock?Talk to someone who works on these every day.

Click to Call (205) 619-2895

What affects the cost of sliding door repair in Saraland

Pricing on sliding door repair depends on what has actually failed, which is why we talk it through before quoting. These are the things that move the number:

  • whether the fix is rollers only or rollers plus track repair
  • how many panels the system has, since three and four panel doors take longer to set
  • whether the frame has moved and needs shimming or refastening
  • the age of the door and whether replacement hardware is still made for it
  • how much damage the worn track has taken before the call

Call and describe what the door is doing. In most cases we can tell you over the phone which of those applies to you before anyone drives out to Saraland.

Broken, stuck, or will not lock?Talk to someone who works on these every day.

Click to Call (205) 619-2895

Areas we cover for sliding door repair in Saraland

Coverage in Saraland takes in the Industrial Parkway corridor, the Shelton Beach Road area and Kali Oka, plus everything around the Saraland civic complex, the I-65 interchange and the Mobile River industrial corridor.

Service area: Saraland, Mobile County, Alabama — and the surrounding communities.

We also cover the nearby Mobile County and the Alabama Gulf Coast communities listed further down this page.

Not sure whether it is a repair or a replacement?Describe the symptoms and we will give you a straight answer.

Click to Call (205) 619-2895

Sliding door repair in Saraland: questions we get asked

Do you repair the older aluminum sliding doors?

Yes, and there are a lot of them in Saraland. Aluminum frames from the sixties through the eighties are actually good candidates for repair because the frame material has not degraded; it is the rollers, the track surface and the weatherstrip that have worn out.

Can you fix the lock without fixing the door?

Sometimes, but if the door has settled, a new lock will not line up with the keeper any better than the old one did. We check the panel alignment first, because a lock that will not catch is often a symptom rather than the actual problem.

Will new rollers fix a door that scrapes loudly?

Only if the track is still in good condition. Once a roller has broken through and the housing has been riding on bare aluminum, the track has a groove worn in it, and new rollers dropped onto that groove will fail quickly. That is when we cap the track.

Why does my sliding door work fine in winter and stick in summer?

That is a moisture and expansion problem, and it is common across Mobile County. Humid months swell wood and vinyl components and expand the frame slightly, which is enough to close up clearance that was already marginal because of worn rollers.

What does it mean when there is water pooling in the track?

The weep holes that drain the sill are blocked. It is one of the most common causes of water on the floor inside, and it is also one of the easiest things to fix, but if it sits long enough it rusts the roller assemblies out.

Do you work on the big multi-panel and stacking patio doors?

Yes. Those systems put a lot of weight on each roller and they are less forgiving of a frame that is even slightly out of square, so alignment work matters more on them than on a standard two-panel door.

Broken, stuck, or will not lock?Talk to someone who works on these every day.

Click to Call (205) 619-2895

Other door repair services in Saraland


Sliding Door Repair near Saraland

We cover the surrounding Mobile County and the Alabama Gulf Coast communities as well:

All door repair services in Saraland  ·  Sliding Door Repair across Alabama  ·  All Alabama service areas

Not sure whether it is a repair or a replacement?Describe the symptoms and we will give you a straight answer.

Click to Call (205) 619-2895
Click to Call (205) 619-2895Tap to speak to a door repair tech now